Nokia 6700 Slide - Manual (Page 43)

Network user name and Network
password — Enter your user ID and
password for the http authentication. This
setting is available only if you have
selected Network authentication to be
used.
To connect to the server and receive
configuration settings for your device,
select Options > Start configuration .
To view the configuration log of the
selected profile, select Options > View
log .
To update the device software over the
air, select Options > Check for updates .
The update does not erase your settings.
When you receive the update package on
your device, follow the instructions on the
display. Your device is restarted once the
installation is complete.
Downloading software updates may
involve the transmission of large amounts
of data (network service).
Make sure that the device battery has
enough power, or connect the charger
before starting the update.
Warning:
If you install a software update, you
cannot use the device, even to make
emergency calls, until the installation is
completed and the device is restarted. Be
sure to back up data before accepting
installation of an update.
Connectivity
Transfer content from another device
Select > Settings > Connectivity >
Switch .
With the Switch application, you can
transfer content, such as contacts,
between two compatible Nokia devices.
The type of content that can be
transferred depends on the model of the
device from which you want to transfer
content. If the other device supports
synchronization, you can also synchronize
data between the other device and your
device. Your device notifies you if the
other device is not compatible.
If the other device cannot be switched on
without a SIM card, you can insert your SIM
card in it. When your device is switched on
without a SIM card, the offline profile is
automatically activated.
Transfer content
To retrieve data from your other device for
the first time:
1 Select the connection type you want
to use to transfer the data. Both
devices must support the selected
connection type.
2 Select the device from which you want
to transfer content. You are asked to
enter a code on your device. Enter a
code (1-16 digits), and select OK . Enter
the same code on the other device,
and select OK . The devices are now
paired.
For some device models, the Switch
application is sent to the other device
as a message. To install the Switch
application on the other device, open
Connectivity 43
© 2010 Nokia. All rights reserved.