Toshiba Qosmio DX730 - Manual (Page 24)

2. Press the Connect button of the dongle using a slender object such as
a tweezer.
Figure 1-7 Press the Connect button of the dongle
1
2
1. Connect button 2. tweezers
3. Slide the Power switch on the back of the keyboard/mouse to the ON
position.
4. Press the Connect button of the keyboard/mouse. Please refer to the
Wireless Keyboard and Wireless Mouse section in Chapter 2, Grand
Tour for the location of the connect button.
The connection will be established.
Turning on the power
This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the
Monitoring of power condition
section in Chapter 5, Power and Power-Up Modes for more information.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
Volume cannot be adjusted during Windows Setup.
You can turn on the power by one of the following ways:
Press and hold the computer’s power button for two or three seconds.
Figure 1-8 Turning on the power
1
1. Power button
Press the power button on the wireless keyboard.
DX730
User's Manual 1-7