Toshiba Satellite C640 User Manual
Page 123
User’s Manual
7-5
HW Setup and Passwords
LAN
Wake-up on LAN
This feature lets the computer's power be turned on from shutdown when it
receives a wake-up packet (Magic packet) from the LAN.
Power will be automatically turned on when a signal is received from an
administrator's computer which is connected via a network.
The following settings can be changed when the Built-in LAN is Enabled.
Connect the AC adaptor when using the Wake-up on LAN function. The
battery retention time will be shorter than the times listed in this manual
when this function is enabled. Refer to the section in chapter 6,
Built-in LAN
This feature enables or disables the Built-in LAN.
Do not install or remove a memory module while Wake-up on LAN is
enabled.
■
The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this
feature.
■
Regarding Wake-up on LAN from sleep or hibernation, you must check
the "
Allow the device to wake the computer
" check
box within the LAN Device properties. (This feafure does not effect the
Wake-up on LAN from sleep or hibernation.)
Enabled
Enables Wake-up on LAN from shutdown.
Disabled
Disables Wake-up on LAN from shutdown.
(Default)
Enabled
Enables built-in LAN functions. (Default)
Disabled
Disables built-in LAN functions.