Toshiba BDX3200 - Manual (Page 17)

1
E
ng
lis
h
6. Press OK, enter Resolution setting. ..Press.OK,.enter.Resolution.setting..
Choose
Previous
a resolution that fits your TV.
Change will be applied immediately, you have
15s to determine whether to save the setting
or rollback to prior resolution. Better
performance will be provided by an HDMI
connection!
Auto
480i/576i
480p/576p
720p
1080i
1080p
OK Next
Note:
When the player is connected to both VIDEO
OUTPUT jack and HDMI OUTPUT jack, resolution set
to 720p/1080i/1080p, there will be no output
through VIDEO OUTPUT jack.
Press./ to.select.an.option..Press.OK.
Select."Yes".or."No".using./.
Resolution
Previous
has been changed!
14s
Does everything looks all right with this
resolution? Press Yes if you want to apply it.
Press No to rollback to previous one. Yes
No
OK Next
7. Press OK, enter Aspect ratio setting. ..Press.OK,.enter.Aspect.ratio.setting..
Choose
Previous
an aspect ratio that fits your TV.
The change will be applied in the next page,
Determine whether to save the setting or
rollback to the previous aspect ratio.
16:9 Full
16:9 Normal
4:3 Pan&Scan
4:3 Letterbox
OK Next
Press./ to.select.an.option..Press.OK.
Setting
wizard is complete!
Finish Previous
Now press the OK button to finish and return
to the Setup Menu.
OK
8. Press OK to return to [General Setting] ..Press.OK.to.return.to.[General.Setting].
Menu.
• [Upgrade]
For.software.upgrades.to.enhance.
performance,.you.could.select.the.
following.upgrade.method.and.start.to.
upgrade.
{.Disc.}/{USB Storage}.
Upgrade.the.software.from.the.disc.or.
USB.Flash.device.
1..Insert.the.disc.or.connect.the.USB.
Flash.device.which.contains.the.upgrade.
file package.
2..Follow.the.instruction.on.the.TV.
screen to confirm upgrade operation.
-.The.system.will.reboot.after.5.seconds..
or.OK.key.is.pressed.
Notes:
- If set [Disc Auto Playback]to [Off], after you
insert the disc that contains the upgraded
information to upgrade system, you have to start
upgrade from this option of SETUP Menu.
- If the upgrade file package did not pass the
verification, error prompt is displayed , check the
package again (such as the package is not complete)
- Make sure the firmware version is not an old
version.
- When you upgrade the system using USB Flash
device, you should make a new folder named
UPG_ALL, and copy the upgrade file into this folder.
• [External Memory]
External. Memory. would. be. used. in. BD-
Live TM .function..When.you.plug.in.the.USB.
flash device which has at least 1GB free
space. to. play. BD-Live TM . function,. the. Blu-
ray. Disc TM . system. would. make. a. directory.
named. BUDA. automatically.. Information.
will.display.the.Free.size.
1..Press.OK.
2..Follow.the.instruction.on.the.TV.
screen.to.select.{Information}.
System Screen Save Off
On
On
On
More...
Language Disc Auto Playback
Playback CEC
Security Disc Auto Upgrade
Network Load Default
General Setting
Return RETURN
Information
Free size is : 0MB
Erase
Move cursor key to select menu option
then use “OK” key to select
3.Press.OK.to.select."Erase",.the.data.in.
the.BUDA.folder.will.be.cleared.
• [Blu-ray Disc Logo]
Turn.On.or.Off.the.Blu-ray.Disc TM .Logo.on.
the.front.panel..You.can.control.the.Blu-
ray.Disc TM .Logo.lights.on.or.off.
[Language]
Set.up.the.OSD(On-Screen.Display),.Menu,.
Audio.and.Subtitle.default.language.for.the.
player.
System OSD English
English
English
English
Language Menu
Playback Audio
Security Subtitle
Network
General Setting
SETUP Exit
Move cursor key to select menu option
then use “OK” key to select
• [OSD]
Select.the.default.on-screen.display.language.
• [Menu]
Select.the.menu.language.
• [Audio]
Select.the.default.audio.language.
• [Subtitle]
Select.the.default.subtitle.language.