Toshiba BDX3200 - Manual (Page 16)

1
E
ng
lis
h
6 Customizing
This. section. describes. the. various. setting.
option.of.this.Blu-ray.Disc TM .player..
If.the.setup.option.is.greyed.out,.it.means.
the. setting. cannot. be. changed. at. the.
current.state.
General Setting
1..Press.SETUP.button.on.the.remote.
control.The.Setup.Menu.appears.
System Screen Saver On
On
On
More...
More...
Move cursor key to select menu option
then use “OK” key to select
Language Disc Auto Playback
Playback CEC
Security
Network
Upgrade
Load Default
General Setting
SETUP Exit
2. Press  to.select.an.option,.then.press
.to.access.
3. Press / to.select.a.setup.option.and
press ..
4. Select.the.setting.you.wish.to.change
and press OK to confirm.
- Press  to.return.to.the.previous.menu.
[System]
To.change.the.following.system.option.
to.personalize.your.Blu-ray.Disc TM ..player .
• [Screen Saver]
Turn.On.or.Off.the.screen.saver.mode.
It.helps.to.protect.the.TV.screen.
{.On.}.–.Set.the.screen.saver.active.
after.approximately.5.minutes.with.no.
operation.
-.The.Blu-ray.Disc TM .player.will.switch.to.
standby.mode.if.there.is.no.operation.
after.the.screen.saver.is.engaged.for.
approximately.15.minutes.
{.Off.}.–.Turn.off.the.screen.saver.
mode..
• [Disc Auto Playback]
Turn.On.or.Off.the.disc.automatic.
playback.switching.mode.
{On}.–.The.disc.playback.automatically.
after.loading.
{Off}.–.Turn.off.disc.auto.playback.
mode.
• [CEC]
This.player.supports.REGZA-LINK.which.
uses.the.HDMI.CEC.(Consumer.
Electronics.Control).protocol..You.can.
use.one.single.remote.control.to.control.
all.REGZA-LINK-compliant.devices.that.
are.connected.through.HDMI.connectors.
{On}.-.Turns.on.REGZA-LINK.features.
-With.CEC.on,.during.TV.standby.with.
the.Blu-ray.Disc TM .player.on,.pressing.
SETUP,.PLAY/PAUSE.will..power.on.the.
TV..When.you.turn.the.TV.off,.this.unit.
will.automatically.turn.off.
{Off}.-.Disables.REGZA-LINK.features.
• [Load Default]
Reset.all.settings.of.Blu-ray.Disc TM .player.
to.initial.default.state.
-.Follow.the.instruction.on.the.TV.screen.
to confirm the default setting operation.
1..Select.Load Default.
2..A.dialogue.box.pops.up.shown.as.
below..Select.OK.
Load Default
Do you want to load default?
OK Cancel
3.It.may.take.awhile.when.loading.
default.is.in.progress..Please.wait...
Load Default
30%
Loading default, please wait...
4..TV.will.display.as.follow:
Welcome
OK Next
to the Toshiba Blu-ray Disc Player Setting
Wizard.
Some simple settings are suggested before you
begin. You can also access detailed settings
from the Setup Menu.
5. Press OK, enter language setting. ..Press.OK,.enter.language.setting..
Press/ to.select.a.language.option.
Choose
Previous
an OSD language before starting.
The language selected will be applied not only
here but also in other OSD windows, menus etc.
English
OK Next