beautypg.com

4preparation – Toshiba BDX3200 User Manual

Page 12

background image

1

E

ng

lis

h

4

Preparation

Always.follow.the.instructions.in.this.chapter.

in.sequence.
Note:
- Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.

Prepare the remote control

1.Open.the.battery.compartment.

2.Insert.two.R03.batteries.with.correct.

polarity.(+/-).as.indicated.

3.Close.the.battery.compartment.
Notes:
- If you are not going to use the remote control
for a long time, remove the batteries.
- Do not use old and new or different types of
batteries in combination.
- Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries in
fire.

• The maximum operable ranges from

the unit are as follows.

-.Line.of.sight:.approx..9.m

-.Either.side.of.the.centre:.approx..7.m..

within.30°

-.Above:.approx..7.m.within.30°

-.Below:.approx..7.m.within.30°

7 m

9 m

7 m

Setting up the player

Find the correct viewing channel

1.Press.

1

to.turn.on.this.product.

2.Turn.on.the.TV.and.switch.to.the.correct.

video-in.channel.(refer.to.the.TV.user.

manual.on.how.to.select.the.correct.

channel).

Initial Setting

When.you.turn.on.this.unit.for.the.

first time, you need to follow these steps.

1..A.welcome.page.will.be.displayed.when.

this.product.is.powered.on.

2..Press.OK.to.enter.language.setting.

3..Select.your.desired.language,

resolution.and.aspect.ratio.using./,.

then.press.OK.

4..Press.SETUP.to.exit.the.Setup.menu.

Use the SETUP menu

1.Press. SETUP to. display. the. Setup. menu.

when.the.Blu-ray.Disc

TM

.Player.is.playing.or.

no.disc..And.press.SETUP to.exit.the.Setup.

menu.

Select menu display language

1

.

Press.SETUP

[General Setting] menu.is.displayed.

2.Select.[Language], then.press .

3.Select.[OSD], then.press .

....-.The.language.options.may.vary.for.

different.regions.

4.Press /

to.select.a.language,.then.

press OK.
Note:
- If this disc player is connected to a HDMI CEC
compliant TV, skip this setting. It switches
automatically to the same OSD menu language
as per your TV setting.