Timer recording – Toshiba RDXV59 User Manual

Page 33

od
uct

ion

Con

ec
ti

on
s

yb
ac
k

ing

Ot
he
rs

Fu
nct

ion
S
e

Recor

ing

S Fu

nc
ti

on
s

Basi

c Se

tu
p /

TV
Vi

Op
eration

• When the unit reaches the specified time, it will be

turned off automatically.

• To change the recording length during One-touch Timer

Recording, press [REC I] repeatedly until the desired
length appears.

• To cancel One-touch Timer Recording within the

specified time, press [STOP C].

Press [STOP C] to stop the recording.

This operation may take a few moments to complete.

Note

• You can change the channel while in the REC pause mode.
• Recording continues until the disc is full (as for HDD, 12

hours after the recording starts) or you stop the recording.

• You cannot change the recording mode in the REC or REC

pause mode.

• Even if the broadcasting you are recording is in the SECAM

system, this unit automatically converts it to the PAL system
when recording.

• You can play back a title on one component while making a

recording on the other component. To do so, simply select
the component (HDD or DVD) you want to use for the
playback by pressing [HDD] or [DVD] during HDD / DVD
recording. And then follow the normal playback procedure.

• If playback and recording are operated in each component

(HDD or DVD) at the same time, select the component you
want to operate first, and then press [PAUSE F] or
[STOP C].

• NTSC recording is prohibited in this unit.
• The remaining recording time will appear on the TV screen

during One-touch Timer Recording. Press [DISPLAY] to see
it on the TV screen.

• The remaining recording time will be displayed on the front

panel display during One-touch Timer Recording.

• Unlike the timer recording, you can perform the following

operations during One-touch Timer Recording.
- Turn off the power. (One-touch timer recording will be

cancelled.)

- Use [REC I] or [STOP C] on the remote control.

• You cannot use the pause function during One-touch Timer

Recording.

• The unit will be turned off automatically under the following

conditions.
- No space remains on the disc.
- If a power failure occurs.

Timer Recording

You can set the unit to record up to 36 programmes, up to a
month in advance. Daily or weekly programme recordings are
also available.
• Be sure to set the clock before entering a timer

programming.

Insert a recordable disc.

In stop mode, press [TIMER PROG.].

“Timer Programming” list will appear.

Select “New Programme” using [K

\ L], then

press [ENTER

\OK].

• If there are 6 programmes or more, use

[SKIP H

\ G] to turn the page.

Enter the date using [K

\ L], then press [B].

Each time you press [L] at the current date, the timer
recording date will change as follows.

e.g., 1st January

• Analogue channel is indicated as “ATV”.

Enter the time to start and to end using [K

\ L],

then press [B].

DVB

ANALOG

HDD

DVD-RW

Video

DVD-RW

DVD-R

DVD+RW

DVD+R

1/1

03/12

0:00

06/12

07/12

7:00

9:00

9:30

DVB 18

DVB 190

Timer Programming

Date

Start

End

STTL

PDC

THU

New Programme

01/01

Daily

M-F (Mon.-Fri.)

W-SAT

W-FRI

W-SUN

31/01

1/1

DVB 125

OFF

07/12

XP 1:00

- - : - -

0:00 03/12

Timer Programming

Skip