Toshiba Camileo X400 - Manual (Page 11)

11
EN
Inserting and Removing an SD Card (Optional)
The camcorder comes with internal memory which allows you to store photos and videos. You can
expand the memory capacity by using an optional SD memory card.
1. Open the SD Card cover.
2. Insert the memory card into the slot. Please refer to the figure
on the right side.
3. To remove the installed SD card, press the card inwards to
release it.
4. When the card pops out, gently remove it from its slot.
5. Recommended memory capacity: 1GB or above.
Note
• When a memory card is fitted, videos/photos are saved on the card rather than on the built-in
memory.
• Protecting Data on an SD Card: SD Card is read-only when it is locked. No photos or videos
can be recorded when the SD card is locked. Make sure the lock is on the writeable position
before recording any media.
Writeable
position
Write-Protected
Position