Section 2 getting started, Loading the battery, Charge your battery – Toshiba Camileo X400 User Manual

Page 10: Loading the battery charge your battery, Getting started

Text mode
Original mode

Section 2

Getting Started

Loading the Battery

The battery comes pre-installed in the camcorder, however you

must remove the insulator on the battery before use.
1. Slide the safety latch and open the battery cover.
2. Remove the battery from the camcorder and pull the

insulator off.

3. Insert the battery according to the correct polarity marks

( + or -).

4. Close the battery cover firmly.

Charge your battery

You must use the supplied AC charger or the USB cable. The camcorder must be turned OFF.

A blinking light indicates active charging and a solid light indicates that charging is complete. In AC

charging mode, the full charging time is about 4- 5 hours and the light will turn off automatically after

3~5 minutes. (Actual charging time may vary. It depends on the battery condition.)

REMOVE