Toshiba Satellite M60 - Manual (Page 68)

4-8 User’s Manual
Operating Basics
Wireless communication switch
You can enable or disable the wireless LAN function with the wireless
communication switch, no transmissions will be sent or received when the
switch is off. Slide the switch forward (to the front side of the computer) to
turn it off and backward (to the rear of the computer) to turn it on.
Wireless communication LED
The LED indicates the status of the wireless communication functions.
Using optical disc drives
The illustrations in this section might differ slightly from your drive,
but operation is the same for all optical disc drives. The full-size drive
provides high-performance execution of disc-based programs.
You can run either 12 cm (4.72") or 8 cm (3.15") discs without an adapter.
An ATAPI interface controller is used for disc drive operation. When the
computer is accessing a disc, an indicator on the drive illuminates.
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on
CD-RW/DVD-ROM drive section for precautions on writing to CDs.
If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on
DVD Super Multi drive section for precautions on writing to CDs.
Loading optical media discs
To load a disc, follow the steps below.
1. Turn on the power.
2. a. Press the eject button to open the drawer slightly.
Turn the switch off in airplanes and hospitals. Check the LED.
It stops glowing when the wireless communication function is off.
LED status Indication
LED off Wireless communication switch is set to off
LED glows Wireless communication switch is on
Use the WinDVD application to view DVD-Video discs.