Toshiba WT310-K - Manual (Page 46)

When Intel ® Rapid Start Technology is enabled, switching from Sleep
Mode to Hibernation Mode consumes power. When you carry your
computer aboard on an aircraft or in places where electronic devices
are regulated or controlled, always power off your computer.
When Intel ® Rapid Start Technology is enabled, Wake-up on LAN,
Wake-up on USB or Wake-up from Sleep Mode automatically
functions are not available when the computer has been switched from
Sleep Mode to Hibernation Mode.
The Windows cannot be restored normally if the battery is exhausted
when the computer is moving from Sleep Mode to Hibernation Mode.
The partition allocation on the Solid State Drive for the Intel ® Rapid
Start Technology cannot be deleted even if Intel ® Rapid Start
Technology is disabled.
Intel ® Rapid Start Technology can be used only for Windows 8.
The Windows restore time from Hibernation Mode depends on the
amount of system memory used in the computer.
Monitoring of power conditions
Power conditions
The computer's operating capability and battery charge status are affected
by different power conditions, including whether an AC adaptor is
connected and what the charge level is for that battery.
The LED in the table below refers to the Battery indicator.
Power on Power off
(no operation)
AC adaptor
connected Battery fully
charged • Operates
• No charge
• LED: white • No charge
• LED: white
Battery partially
charged or no
charge • Operates
• Charge
• LED: amber • Quick charge
• LED: amber
User's Manual 3-14