Toshiba WT310-K - Manual (Page 41)

Docking connector Connects to the computer.
Eject button Begins the computer’s disconnect sequence.
Once the eject button is pressed and the
computer cannot communicate with external
devices connected to the keyboard dock. Undock
and re-dock the computer to re-establish
communication.
DC IN 19V jack The AC adaptor connects to this jack in order to
power the computer and charge its internal
batteries. Please note that you should only use
the model of AC adaptor supplied with the
computer at the time of purchase - using the
wrong AC adaptor can cause damage to the
computer.
LAN jack This jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T), Fast Ethernet
LAN (100 megabits per second, 100BASE-TX)
and Gigabit Ethernet LAN (1000 megabits per
second, 1000BASE-T). Refer to
Operating
Basics , for details.
Do not connect any cable other than a LAN cable to the LAN jack. It
could cause damage or malfunction.
Do not connect the LAN cable to a power supply. It could cause
damage or malfunction.
HDMI port HDMI port can connect with Type A connector
HDMI cable.
Please refer to the
HDMI port section for details
Universal Serial Bus
(USB 2.0) port One Universal Serial Bus port, which complies to
the USB 2.0 standard, is provided on the left side
of the keyboard dock.
Please note that it is not possible to confirm the operation of all functions of
all USB devices that are available. In view of this it may be noted that some
functions associated with a specific device might not operate properly.
User's Manual 3-9