Toshiba BDX1200 - Manual (Page 19)

1
E
ng
lis
h
• [Video Adjust]
Select a predefined setting of the video.
1..Press.OK..
2..Press/ to adjust the video
Brightness, Contrast, Hue and Saturation.
{Brightness}.-.press./.to.adjust.
the.brightness.of.display,.goes.left.
means.dark.and.right.means.bright.
{Contrast}.-.press./.to.adjust.
the.contrast.of.display,.goes.left.
means.low.contrast.and.right.means.
high.contrast.
{Hue}.-.press./.to.adjust.the.Hue.
of. display,. goes. left. means. low. hue.
and.right.means.high.hue.
{Saturation}. -. press. /. to. adjust.
the.saturation.of.display,.goes.left.
means.low.Saturation.and.right.means.
high.saturation.
3..Press.RETURN.to.exit.
Brightness
Contrast
Hue
Saturation
RETURN Exit Change
• [Sharpness]
Select.the.level.of.sharpness:.High,.
Middle,.Low
{High}.-.Select.High.sharpness.level
{Middle}.-.Select.Middle.sharpness.
level
{Low}.-.Select.Low.sharpness.level
[Motion Video Process]
TV Video Mode
Video Process
Motion Video...
Display Setting
SETUP Exit
Move cursor key to select menu option
then use “OK ” key to select
Standard
• [Video Mode]
Select.the.output.mode.of.video,options.
include:.Standard,.Vivid,.Smooth,.these.
can.change.the.output.display.
{Standard}.-.output.video.signal.without.
any.processing.and.in.standard.mode.
{Vivid}.-.output.video.signal.in.vibrant.
colour.mode.
{Smooth}.-.output.video.signal.in.
smooth.mode.
Audio Setting
1. Press.SETUP, [General Setting] menu
is.displayed.
2. Press  to.select.[Audio Setting],.
then.press...
3. Select.an.option,.press  to.access.
SETUP Exit
Audio Output Spdif PCM
PCM
48K
HDMI
Down_samp
Auto DRC
Audio Setting
Move cursor key to select menu option
then use “OK ” key to select
4. Press / to.select.a.setup.option.and
press ..
5. Select.the.setting.you.wish.to.change
and press OK to confirm.
-.Press  to.return.to.the.previous.
menu.
-.Press SETUP.to.exit.the.menu..
[Audio Output]
• [Spdif]
Select.the.output.mode.of.COAXIAL.
jack,.options.include.Bitstream,.PCM,.
Re-encode.and.Off.
{Bitstream}.–.Output.digital.signal.
without.any.processing.
{PCM}.–.Output.digital.signal.with.
processing,.only.two.channels.export.
{Re-encode}.–.Auto.select.signal.type.
from.COAXIAL.jack.according.to.the.
Audio.stream.on.disc.
{Off}.–.No.output.for.S/PDIF.
• [HDMI]
Select.the.output.mode.of.HDMI.Out.
jack,.options.include.Bitstream,.PCM,.
Re-encode.and.Off.
{Bitstream}.–.Output.HDMI.digital.
signal.without.any.processing.
{PCM}.–.Output.HDMI.digital.signal.
with.processing,.only.two.channels.
export.
{Re-encode}.–.Auto.select.signal.type.
from.HDMI.Out.jack.according.to.the.
Audio.stream.on.disc.
{Off}.–.No.output.for.HDMI.
• [Down_samp]
Select. the. digital. audio. signal. sampling.
frequency.
{48K}.–.For.discs.recorded.at.sampling.
rate.of.48.kHz.
{96K}.–.For.discs.recorded.at.sampling.
rate.of.96.kHz..