Toshiba BDX1200 - Manual (Page 14)

1
E
ng
lis
h
6 Customizing
This. section. describes. the. various. setting.
option.of.this.Blu-ray.Disc TM .player..
If.the.setup.option.is.greyed.out,.it.means.
the.setting.cannot.be.changed.at.the
current.state.
General Setting
1..Press.SETUP.button.on.the.remote
control.The.Setup.Menu.appears.
System Screen Saver On
On
On
More...
More...
Language Disc Auto Playback
Playback CEC
Security Load Default
Network Upgrade
General Setting
SETUP Exit
Move cursor key to select menu option
then use “OK” key to select
2. Press  to.select.an.option,.then.press
.to.access.
3. Press / to.select.a.setup.option.and
press .
4. Select.the.setting.you.wish.to.change
and press OK to confirm.
- Press  to.return.to.the.previous.menu.
[System]
To.change.the.following.system.option.to.
personalize.your.Blu-ray.Disc TM .player .
• [Screen Saver]
Turn.On.or.Off.the.screen.saver.mode.
It.helps.to.protect.the.TV.screen.
{.On.}.–.Set.the.screen.saver.active.
after.approximately.5.minutes.with.no.
operation..You.can.turn.off.the.screen.
saver.by.pressing.the.SETUP.button.
-.The.Blu-ray.Disc TM .Player.will.switch.to.
standby.mode.if.there.is.no.operation.
after.the.screen.saver.is.engaged.for.
approximately.15.minutes.
{.Off.}.–.Turn.off.the.screen.saver.
mode.
• [Disc Auto Playback]
Turn.On.or.Off.the.disc.automatic.
playback.switching.mode.
{On}.–.The.disc.playback.automatically.
after.loading.
{Off}.–.Turn.off.disc.auto.playback.
mode.
• [CEC]
This.player.supports.REGZA-LINK.which.
uses.the.HDMI.CEC.(Consumer.
Electronics.Control).protocol..You.can.
use.one.single.remote.control.to.control.
all.REGZA-LINK-compliant.devices.that.
are.connected.through.HDMI.
connectors.
{On}.-.Turns.on.REGZA-LINK.features.
-With.CEC.on,.during.TV.standby.with.
the.Blu-ray . Disc TM .Player.on,.pressing.
SETUP,.PLAY/PAUSE.will..power.on.the.
TV..When.you.turn.the.TV.off,.this.unit.
will.automatically.turn.off.
{Off}.-.Disables.REGZA-LINK.features.
• [Load Default]
Reset.all.settings.of.Blu-ray.Disc TM .Player.
to.initial.default.state.
-.Follow.the.instruction.on.the.TV.screen.
to confirm the default setting operation.
1..Select.Load Default.
2..A.dialogue.box.pops.up.shown.as.
below..Select.OK.
Load Default
Do you want to load default?
OK Cancel
3..It.may.take.awhile.when.loading.
default.is.in.progress..Please.wait...
Load Default
30%
Loading default, please wait...
4..TV.will.display.as.follow:
OK Next
Welcome
to the Toshiba Blu-ray Disc Player Setting
Wizard.
Some simple settings are suggested before you
begin. You can also access detailed settings
from the Setup Menu.
5. Press OK, enter language setting. ..Press.OK,.enter.language.setting..
Press/ to.select.a.language.option.
Previous
English
OK Next
Choose
an OSD language before starting.
The language selected will be applied not only
here but also in other OSD windows, menus
etc.
Français
Deutsch
Italiano
Español
Português