Timer recording – Toshiba RDXV49 User Manual

Page 33

od
uct

ion

Con

ec
ti

on
s

yb
ac
k

ing

Ot
he
rs

Fu
nct

ion
S
e

Recor

ing

S Fu

nc
ti

on
s

Basi

c Se

tu
p /

TV
Vi

Op
eration

• When the unit reaches the specified time, it will be

turned off automatically.

• To change the recording length during One-touch Timer

Recording, press [REC I] repeatedly until the desired
length appears.

• To cancel One-touch Timer Recording within the

specified time, press [STOP C].

Press [STOP C] to stop the recording.

This operation may take a few moments to complete.

Note

• You can change the channel while in the REC pause mode.
• Recording continues until the disc is full (as for HDD, 12

hours after the recording starts) or you stop the recording.

• You cannot change the recording mode in the REC or REC

pause mode.

• Even if the broadcasting you are recording is in the SECAM

system, this unit automatically converts it to the PAL system
when recording.

• If the external equipment is connected to AV2, the picture of

the external equipment will be output except during the DVD
playback of this unit. Turn off the external equipment or
press [DISPLAY] to output the picture of this unit.

• You can play back a title on one component while making a

recording on the other component. To do so, simply select
the component (HDD or DVD) you want to use for the
playback by pressing [HDD] or [DVD] during HDD / DVD
recording. And then follow the normal playback procedure.

• If playback and recording are operated in each component

(HDD or DVD) at the same time, select the component you
want to operate first, and then press [PAUSE F] or
[STOP C].

• NTSC recording is prohibited in this unit.
• The remaining recording time will appear on the TV screen

during One-touch Timer Recording. Press [DISPLAY] to see
it on the TV screen.

• The remaining recording time will be displayed on the front

panel display during One-touch Timer Recording.

• Unlike the timer recording, you can perform the following

operations during One-touch Timer Recording.
- Turn off the power. (One-touch timer recording will be

cancelled.)

- Use [REC I] or [STOP C] on the remote control.

• You cannot use the pause function during One-touch Timer

Recording.

• The unit will be turned off automatically under the following

conditions.
- No space remains on the disc.
- If a power failure occurs.

Timer Recording

You can set the unit to record up to 36 programmes, up to a
month in advance. Daily or weekly programme recordings are
also available.
• Be sure to set the clock before entering a timer

programming.

Insert a recordable disc.

In stop mode, press [TIMER PROG.].

“Timer Programming” list will appear.

Select “New Programme” using [K

\ L], then

press [ENTER

\OK].

• If there are 6 programmes or more, use

[SKIP H

\ G] to turn the page.

Enter the date using [K

\ L], then press [B].

Each time you press [L] at the current date, the timer
recording date will change as follows.

e.g., 1st January

• Analogue channel is indicated as “ATV”.

Enter the time to start and to end using [K

\ L],

then press [B].

DVB

ANALOG

HDD

DVD-RW

Video

DVD-RW

DVD-R

DVD+RW

DVD+R

1/1

03/12

0:00

06/12

07/12

7:00

9:00

9:30

DVB 18

DVB 190

Timer Programming

Date

Start

End

STTL

VPS/PDC

THU

New Programme

01/01

Daily

M-F (Mon.-Fri.)

W-SAT

W-FRI

W-SUN

31/01

1/1

DVB 125

OFF

07/12

1:00

- - : - -