Toshiba Tecra S11 - Manual (Page 87)

User’s Manual 3-31
TECRA A11/S11, Satellite Pro S500
USB FDD Kit
The USB floppy diskette drive accommodates either a 1.44MB or
720KB floppy diskette and connects to one of the computer’s USB ports.
Figure 3-14 The USB floppy diskette drive
Connecting the USB floppy diskette drive
To connect the drive, plug the floppy diskette drive’s USB connector into a
computer’s USB port.
Figure 3-15 Connecting the USB floppy diskette drive
1
2
3
4
1. USB connector
2. Disk-In-Use Indicator
3. Floppy diskette slot
4. Eject button
Make sure the connector is properly aligned with the socket. Do not try to
force the connection, doing so can damage the connecting pins.
1
2
1. USB port
2. USB connector
If you connect the USB floppy diskette drive after the computer has already
been turned on, it will take about ten seconds for it to be recognized by the
computer. Do not attempt to disconnect and reconnect the drive before this
period has elapsed.