Toshiba BDX5300 - Manual (Page 24)

24
English
Audio Setting
1. Press SETUP, [General Setting] menu
is displayed.
2. Press  to select [Audio Setting],
then press .
3. Select an option, press  to access.
SETUP Exit
Audio Output Coaxial PCM
PCM
48K
HDMI
Down_samp
Auto Dolby DRC
Audio Setting
Move cursor key to select menu option
then use “OK ” key to select
4. Press / to select a setup option and
press .
5. Select the setting you wish to change
and press OK to confirm.
- Press  to return to the previous
menu.
- Press SETUP to exit the menu.
[Audio Output]
• [Coaxial]
Select the output mode of COAXIAL
jack, options include Bitstream, PCM,
Re-encode and Off.
{Bitstream} – Output digital signal
without any processing.
{PCM} – Output digital signal with
processing, only two channels export.
{Re-encode} – Auto select signal type
from COAXIAL jack according to the
Audio stream on disc.
{Off} – No output for Coaxial.
• [HDMI]
Select the output mode of HDMI Out
jack, options include Bitstream, PCM,
Re-encode and Off.
{Bitstream} – Output HDMI digital
signal without any processing.
{PCM} – Output HDMI digital signal
with processing.
{Re-encode} – Auto select signal type
from HDMI Out jack according to the
Audio stream on disc.
{Off} – No output for HDMI.
• [Down_samp]
Select the digital audio signal sampling
frequency. (Only Coaxial)
{48K} – For discs recorded at sampling
rate of 48 kHz.
{96K} – For discs recorded at sampling
rate of 96 kHz.
{192K} – For discs recorded at sampling
rate of 192 kHz.
• [Dolby DRC]
Select the Dynamic Range Control mode
which makes it available to listen to a
movie at a low volume without losing
sound clarity.
{Off} – Non-dynamic range compress.
{On} – Dynamic range compress.
{Auto} – Adjust the DRC according to
input audio.
The setting of Auto is effective for Dolby
TrueHD.
System Information
1. Press SETUP, [General Setting] menu
is displayed.
2. Press  to select [System
Information].
- The current software version and MAC
address(Ethernet and Wireless) will be
displayed.
- Press  to return to the previous
menu.
- Press SETUP to exit the menu.
SETUP Exit
System Information
Move cursor key to select menu option
then use “OK ” key to select
Software version: V XX
Ethernet MAC: E8-E0-B7-XX-XX-XX
Wireless MAC: XX-XX-XX-XX-XX-XX
Network Functional description
Media Server Search
With this player connected to network, you
can play video, music and photo files from
the server.
1. Connect this player to server network.
2. Press MC.
3. Select [Media Server Search], and press
OK.
»» All the connected shared servers/
folders are shown in the list (Max. 16).
4. Select a server, and press OK to open it.
5. Select a kind of media (Photo, Music,
Video) and press OK to open it.
6. Select a file or a folder to play or open
it. You can only see and play files
supported by both Windows Media player
and the Blu-ray Disc TM player.
• You may control play with the disc play
features.