Toshiba RV753 - Manual (Page 35)

35
CONTROLS AND FEATURES
E
n
g
lish
To cancel searching for the AP:
Press RETURN while searching for the AP. A message
will appear; then, press C or c to select Yes and press
Q.
Assisted Setup
a
In the PREFERENCES menu, highlight Network Setup
and press
Q .
b
Press B or b to highlight Wireless Setup, and press
Q .
c
Press B or b to highlight Assisted Setup, and press
Q .
d
Press B or b to select the desired AP and press
Q
.
NOTE: Check the MAC address on the label of the AP
or in the manual, and select your AP.
e
Highlight Security Key and press
Q
. The Software
Keyboard window will appear.
f
Input the Security Key by using the Software Keyboard
(see page 38). To save your setting, press the BLUE
button.
NOTE:
• The Security Key must adhere to these conditions:
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
• There is only one key ID to set for WEP encryption.
g
Highlight Done, and then press Q .
NOTE: If Network Name is not displayed, see step 4
and 5 in Manual Setup below to set Network Name
before pressing Done.
NOTE: Settings are not saved if RETURN is pressed before
Done is selected.
Manual Setup
a
In the PREFERENCES menu, highlight Network Setup
and press
Q
.
b
Press B or b to highlight Wireless Setup, and press
Q .
c
Press B or b to highlight Manual Setup, and press
Q
.
d
Press B or b to highlight Network Name, and press
Q
. The Software Keyboard window will appear.
e
Input the Network Name by using the Software
Keyboard (see page 38). To save your setting, press the
BLUE button.
f
Press B or b to highlight Authentication, and then
press C or c to select Open System, Shared Key,
WPA-PSK or WPA2-PSK.
g
Press B or b to highlight Encryption, and then press
C or c to select None, WEP, TKIP or AES.
NOTE:
• Certain encryption types are only compatible with
specific authentication types.
- When Authentication is Open System, only WEP or
None is compatible.
- When Authentication is Shared Key, only WEP is
compatible.
- When Authentication is WPA-PSK or WPA2-PSK,
only TKIP or AES is compatible.
• When incompatible Authentication/Encryption
pairings are detected, a warning message will be
displayed, and no connection attempt will be made
until the incompatibility is resolved.
• There is only one key ID to set for WEP encryption.
h
Press B or b to highlight Security Key, and press
Q
.
i
Input the Security Key by using the Software Keyboard
(see page 38). To save your setting, press the BLUE
button.
NOTE: This item is grayed out when Encryption is
None.
j
Highlight Done, and then press
Q
.
NOTE: When Encryption is None, a message will
appear. Press
C or c to select Yes and press
Q
.
NOTE: Settings are not saved if RETURN is pressed before
Done is selected.
Easy Setup On
Manual Setup
Wireless Setup
Assisted Setup
Easy Setup On
Manual Setup
Wireless Setup
Assisted Setup
WL75_WebOM_UK.book Page 35 Thursday, June 17, 2010 7:10 PM