Toshiba RV753 - Manual (Page 28)

28
CONTROLS AND FEATURES
En
glish Picture controls
Most of the picture controls and functions are
available in both digital and analogue modes.
PLEASE NOTE: features not available will be greyed
out.
This television offers the choice of personalising the picture
style.
AutoView, Dynamic, Standard, Movie, Store, Game and
PC are preset options and affect many features/settings within
the television.
NOTE:
• Because the AutoView mode automatically adjusts picture
settings based on ambient light conditions and input signal
content, the Auto Brightness Sensor and Expert Mode
menus are greyed out when it is selected.
• Store mode is only available when Location is set to Store.
• Game mode is available in external input mode (other than
aerial input). When you select Game mode, suitable
widescreen formats will be selected.
• PC mode is available in RGB/PC input mode or HDMI input
mode.
a
In the PICTURE menu, press b to select Picture
Mode.
b
Press C or c to select the picture mode you prefer and
press Q .
NOTE: The picture mode you select affects the current input
only. You can select a different picture mode for each input.
You can customize current picture mode settings as desired. For
example, while selecting “Dynamic”, if you change the
following items, such as Backlight, Contrast, Brightness,
Colour, Tint, Sharpness and the Advanced Picture Settings
items, your new settings are saved for “Dynamic” picture
mode.
a
In the PICTURE menu press b to select either
Backlight, Contrast, Brightness, Colour, Tint or
Sharpness and press
Q
.
b
Press C or c to adjust the settings.
This feature resets all picture settings to the factory settings
except Picture Mode.
NOTE: If no picture settings have been changed, Reset is not
available.
a
In the PICTURE menu, press b to select Reset and
press
Q
.
b
A confirmation message will appear. Press C or c to
select Yes and press
Q
.
When 3D Colour Management is set to On, it allows the
‘Base Colour Adjustment’ feature to become available.
a
In the PICTURE menu, press b to select Advanced
Picture Settings and press
Q
.
b
Press b to select 3D Colour Management.
c
Press C or c to select On or Off, and then press
Q
.
Picture Mode
Picture Mode
Reset
Backlight
Colour
Tint
Sharpness
100
100
0
0
0
0
Dynamic
Contrast
Brightness
PICTURE
Picture preferences
Reset
3D Colour Management
3D Colour Management
Base Colour Adjustment
Colour Temperature
Black/White Level
Static Gamma
Noise Reduction
10
0
Off
On
Auto Brightness Sensor Settings
Active Backlight Control
Advanced Picture Settings
WL75_WebOM_UK.book Page 28 Thursday, June 17, 2010 7:10 PM