Toshiba RV753 User Manual
Page 30
30
CONTROLS AND FEATURES
En
glish
When Active Backlight Control is activated, it will
automatically optimize the backlighting levels for dark scenes.
a
In the Advanced Picture Settings menu, press
b
to
select Active Backlight Control.
b
Press
C
or
c
to select On or Off.
Black/White Level increases the strength of dark areas of the
picture to improve the definition.
a
In the Advanced Picture Settings menu, press
b
to
select Black/White Level.
b
Press
C
or
c
to adjust the level. The effect depends on
the broadcast and is most noticeable on dark colours.
The static gamma feature allows you to adjust the levels of black
in the picture.
a
In the Advanced Picture Settings menu, press
b
to
select Static Gamma.
b
Press
C
or
c
to adjust the level.
When watching a DVD, the compression may cause some words
or picture elements to become distorted or pixelated.
Using the MPEG NR feature reduces this effect by smoothing
out the edges.
a
In the Advanced Picture Settings menu, press
b
to
select Noise Reduction and press
Q
.
b
Press
b
to select MPEG NR.
c
Press
C
or
c
to select Low, Middle, High or Off to
suit your preference.
DNR allows you to ‘soften’ the screen representation of a weak
signal to reduce the noise effect.
a
Select DNR from the Noise Reduction menu.
b
Use
C
or
c
to select Low, Middle, High, Auto or Off.
The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).
The Resolution+ feature allows you to adjust the clarity levels
for your desired picture settings.
a
In the Advanced Picture Settings menu, press
b
to
select Resolution+ and press
Q
.
b
In the Resolution+ field, select On.
c
Press
b
to highlight Level, and then press
C
or
c
to
adjust the level.
NOTE:
• This feature may not work properly depending on the
content.
• Adjustable range varies according to the Picture Mode you
set.
• Noise may appear in the picture depending on the device
connected to the TV (e.g. a device with a specific enhancer
function).
This feature will reduce picture blur without decreasing image
brightness, or adding flicker.
a
In the Advanced Picture Settings menu, press
b
to
select Active Vision M100.
b
Press
C
or
c
to select On or Off.
NOTE: When Picture Mode is set to Game, this feature will
be grayed out and automatically set to Off.
Active Backlight Control
Black/White Level
Static Gamma
MPEG NR – Noise Reduction
Noise Reduction
DNR
MPEG NR
Low
Auto
DNR – Digital Noise Reduction
Resolution+
Active Vision M100 (SL series only)
Resolution+
Level
Resolution+
On
3
WL75_WebOM_UK.book Page 30 Thursday, June 17, 2010 7:10 PM