Toshiba EL933 - Manual (Page 18)

English
English - 17 -
Features in Menu,
continued
Reset TV: Press OK and input your correct code. If you are
sure to reset the TV, select OK and press OK to reset all
the TV settings to the default. Then the initial setup wizard
will appear.
Press RETURN to go back to the previous menu.
Press MENU to exit.
PC Settings (*)
(*) While in PC mode, to optimize your TV’s settings as a
PC monitor, you can enter the SETUP menu and select PC
Setting. Press OK to display the following options:
Auto Adjust: Sets the picture into correct place
automatically.
Horizontal Position: Shifts the image horizontally to right
hand side or left hand side of the screen.
Vertical Position: shifts the image vertically towards the
top or bottom of the screen.
Phase: Allows you to get a clear picture by trial and error
method.
Clock: Corrects the interference that appear as vertical
banding in dot intensive presentations like spreadsheets or
paragraphs or text in smaller fonts.
Applications Menu
Press MENU and select APPLICATIONS by using the or
button. Press OK to display the Applications Menu.
Time Zone
Clock
EPG
Sleep Timer
As broadcaster
Off
...
APPLICATIONS
...
Demo
...
Select
Back
Exit
Enter OK
RETURN
EXIT
EPG: Goes to electronic programmer guide.
Time Zone: Selects a time zone.
Clock: Allows you set the date, time, power on timer and
power off timer.
Note: Either the power on timer or power off timer is
activated, the timer LED on the front cabinet will light
up in green.
Note: If ATV only is tuned, the TV may not be able to
display the current time.
Sleep Timer: Sets a time for sleep timer.
Note: The hint of TV's switching off will appear during
the last minute if power off timer or sleep timer is
activated. Press EXIT to keep the TV on and cancel
TV's shutting down.
Demo: Allows you to enable or disable the sticker demo
feature.
Note: The Demo option is available only when the
SETUP/Location is set as Retail.
Press RETURN to go back to the previous menu.
Press MENU to exit.
Preferences Menu
Press MENU and select PREFERENCES by using the or
button. Press OK to display the Preferences Menu.
Teletext
Panel Lock
HDMI-Link Setup
Auto Format
Auto
On
Off
4:3 Strentch
Blue Screen
DivX(R) Registration
DivX(R) Deregistration
Side Panel
On
Off
...
...
1
...
PREFERENCES
Select
Back
Exit
Enter OK
RETURN
EXIT
HDMI-Link Setup: Allows you to make HDMI-Link settings.
When CEC devices are connected to the HDMI terminals,
you can enable the HDMI-LINK function so that you can
access Quick Access/HDMI-LINK and use the TV's
remote to control the CEC devices.
Teletext: Selects a teletext mode: Auto or List.
Panel Lock: When set On, the side panel buttons are
locked.
Auto Format: Turns on or off auto format function.
4:3 Stretch: Turns on or off 4:3 stretch function.
Note: Only when Auto Format is turned on, 4:3 Stretch
can be adjusted.
Blue Screen: When set On, the TV will appear as a blue
screen and the sound will be muted if no signal is received.
DivX® Registration: Press OK to obtain your DivX®
registration code.
DivX® Deregistration: Press OK to follow the on-screen
message to deregister your TV.
Side Panel: When the picture format is 4:3 or 14:9, select
a kind of side panel to make viewing in bright or dark
conditions more comfortable
Press RETURN to go back to the previous menu.
Press MENU to exit.