Toshiba EL933 - Manual (Page 17)

English
English - 16 -
Features in Menu,
continued
Setup Menu
Press MENU and select SETUP by using the or button.
Press OK to enter the SETUP menu.
Select
Back
Exit
Select
Back
Exit
Country
Tuner Mode
Language
Channel Install
Channel Settings
AV Connection
Automatic Power Down
Location
German
On
Home
Germany
Antenna
...
...
SETUP
...
Diagnostics
...
RETURN
EXIT
Language: Selects a preferred language as the menu
language.
Country: Selects your country.
Tuner Mode: Selects the tuner mode: Antenna or Cable.
Channel Install: Allows you to install the channels.
Channel Settings: Allows you to make channel settings
like Channel Skip, Channel Sort, Subtitle and Audio,
and Standby Channel Update(available for Italy and
Hungary only), and confi gure Parental settings and
access common interface services by selecting Common
Interface.
AV Connection: Press OK to enter its submenu.
EXT1 input: Selects AUTO, S-VIDEO, CVBS or RGB.
Diagnostics: Shows the signal strength, signal quality,
frequency, service ID, network ID and network name.
Automatic Power Down: Turns on or off the automatic
power down feature. When set to On, the TV will turns into
standby if there is no operation for 4 hours.
Location: Selects the location: Home or Retail.
Software Upgrade:
Allows you to upgrade the TV's software. Press OK to
enter its submenu. The options include Auto Upgrade and
USB Upgrade.
Auto Upgrade: Press OK to display the option list.
Select Auto download and press or to select
Yes, then the TV will search for and download the
latest software when available.
Select Manual OAD download and press OK to start
manual scanning the latest software and follow the
on-screen instruction to upgrade the TV.
USB Upgrade: Plug a USB device stored with the new
software to the TV fi rst. Then press OK to display the
following screen.
1: “V0.08” update to “V0.10”
Are you sure to update the firmware?
Updating Wizard
Yes
No
Select Next Exit EXIT
Use or to select "Yes" and press OK or to start
updating. The screen appears as below.
Updating......
Please DO NOT unplug the USB dongle and turn off the TV set during firmware
updating!
Updating Wizard
38%
When the updating process fi nishes, you can see the
following message on the screen.
The firmware is successfully updated to version .
Please remove the USB device and restart the TV again.
Updating Wizard
Power
Press to turn the TV into standby and again to
restart the TV.
System Information: Displays the system information
such as model name.