Toshiba SATELLITE U400 - Manual (Page 54)

User’s Manual 3-5
Getting Started
Turning on the power
This section describes how to turn on the power.
Press and hold the computer's power button for two or three seconds.
Turning on the power
Windows Vista™ setup
When you first turn on the power, the computer's initial screen is the
Microsoft
®
Windows Vista™ Startup Screen Logo.
Follow the on-screen directions.
Turning off the power
The power can be turned off in one of the following modes: Shut down
(Boot), Hibernation or Sleep Mode.
Shut Down mode (Boot mode)
When you turn off the power in Shut Down mode no data is saved and the
computer will boot to the operating system’s main screen.
1. If you have entered data, save it to the hard disk.
2. Make sure all disk (disc) activity has stopped, then remove the CD/
DVDs.
After you turn on the power for the first time, do not turn it off until you have
set up the operating system. Refer to the section Windows Vista™ setup .
Be sure to read the Windows End User License Agreement
display carefully.
Make sure the Disk LED and ODD indicators are off. If you turn off the
power while a disk (disc) is being accessed, you can lose data or damage
the disk (disc).