Toshiba L2433 - Manual (Page 31)

31
English
Black/White Level
This function increases the strength of dark
areas of the picture, which improves picture
GH¿QLWLRQ
1 In the Picture Settings
PHQXSUHVVŸ
RUźWRVHOHFWBlack/White Level.
3UHVVŻRUŹWRDGMXVWWKHOHYHOIURP
Off, Low, Middle or High. The effect
depends on the broadcast and is most
noticeable on dark colours.
Cinema Mode
$PRYLH¿OP¶VSLFWXUHUXQVDWIUDPHVD
second, whereas movie software such as DVD,
etc., that you enjoy watching on television at
home runs at 30 (NTSC) or 25 (PAL) frames a
second. To convert this signal to reproduce a
smooth motion and picture quality, select the
Cinema Mode.
1 In the Picture Settings
PHQXSUHVVŸ
RUźWRVHOHFWCinema Mode.
3UHVVŻRUŹWRVHOHFWOn or Off.
Colour Temperature
Colour Temperature increases the ‘warmth’ or
“coolness” of a picture by increasing the red or
blue tint.
1
In the Picture Settings PHQXSUHVVŸ
RUźWRVHOHFWColour Temperature and
SUHVVŹ
3UHVVŸRUźWRVHOHFWColour
Temperature
DQGSUHVVŻRUŹWRVHOHFW
Medium, Warm or Cool to suit your
preference.
Colour Temperature
Colour Temperature
Red Level
Green Level
Blue Level
Medium
0
0
0
3UHVVŸRUźWRVHOHFWRed Level, Blue
Level or Green Level
DQGSUHVVŻRUŹ
to adjust the settings as required.
Static Gamma
The static gamma feature allows you to adjust
the levels of black in the picture.
1
In the Picture Settings
PHQXSUHVVŸ
RUźWRVHOHFWStatic Gamma.
3UHVVŻRUŹWRVHOHFWWKHQXPEHURI
Static Gamma (-5~+5).
Reset
This feature resets all picture settings to the
factory settings.
In the Picture Settings PHQXSUHVVŸRUźWR
select Reset and press to reset settings.
NOTE: If any picture settings have not been
changed, Reset is not available.
Active Backlight Control
When the Active Backlight Control feature
is activated, High mode will control the
backlighting levels depending on various
scenes such as picture motion, bright scene
or dark scene. Low mode will control the
backlighting level on dark scene.
1
In the Picture Settings
PHQXSUHVVŸ
RUźWRVHOHFWActive Backlight Control.
3UHVVŻRUŹWRVHOHFWOff, Low or High.