Toshiba Tecra A5 User Manual
Page 148
TOSHIBA A5 9-9
Troubleshooting
DVD Super Multi drive with double layer disc recording
support or DVD Super Multi drive
For more information, refer to Chapter 4,
.
Problem
Procedure
Some discs run
correctly, but others do
not
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software's needs.
Check the disc's documentation.
Check the type of disc you are using. The drive
supports:
DVD-ROM:
DVD-ROM, DVD-Video
CD-ROM:
CD-DA, CD-Text, Photo CD™
(single/multi-session), CD-ROM
Mode 1, Mode 2, CD-ROM XA
Mode 2 (Form1, Form2), Enhanced
CD (CD-EXTRA), CD-G (Audio CD
only)
Check the region code on the DVD. It must match
that on the DVD-ROM drive. Region codes are
listed in the optical disc section in Chapter 2,
Problem
Procedure
You cannot access a
disc in the drive
Make sure the drive's drawer is securely.
Press gently until it clicks into place.
Open the drawer and make sure the disc is
properly seated. It should lie flat with the label
facing up.
A foreign object in the drawer could block laser
light from reading the disc. Make sure there is no
obstruction. Remove any foreign object.
Check whether the disc is dirty. If it is, wipe it with
a clean cloth dipped in water or a neutral cleaner.
Refer to
section in Chapter 4 for
details on cleaning.