Self test – Toshiba Satellite Pro M50 User Manual
Page 127
User’s Manual
9-4
Troubleshooting
Self test
When the computer starts up, the self test will be run automatically, and a
screen image will be displayed:
This message remains on the screen for a few seconds.
If the self test is successful, the computer tries to load the operating system
based around how the Boot Priority option is set within the computer’s
BIOS setup.
If any of the following conditions are present, the self test failed:
■
The computer stops and does not proceed to display information or
messages except the TOSHIBA logo.
■
Random characters appear on the screen, and the system does not
function normally.
■
The screen displays an error message.
Turn off the computer and check all cable connections as well as PC Card
and memory module connections. If the test fails again, contact your
dealer.
(This screen image is
one of the examples.
You may see the
different screen image
depending on the
model you purchased.)