Blaupunkt MP3000 - Manual (Page 13)

ENGLISH
E-12
MP3 / WMA operation
You can play MP3 and WMA files written on CD-ROMs, CD-
Rs, or CD-RWs by following the procedures below.
In this section, “track” and “album” mean “MP3 or WMA file”
and “folder” in PC terminology, respectively.
MP3 / WMA play
Loading Discs
1. Press the OPEN and insert a CD-ROM, CD-R, or CD-RW
with the labeled side upward.
2. Close the front panel.
During scanning of the disc, ‘‘LOADING’’and ‘‘FILE CHECK’’
appear in the display window.
Playback begins automatically.
CD-R/RW with very complex folder trees could take in the
range of 20-seconds to load.
Listening to a disc that is already loaded
Press the CD to select the CD mode.
Playback begins automatically.
Pausing Playback
Press the 6/ .
To resume playback, press the 6/ again.
Stopping Playback
Press the BND / TS to select the radio reception (FM 1, FM 2,
FT or AM, AT).
Ejecting Discs
Press the to eject the disc located behind the flip-down
front panel.
Notes
• The unit will turn on automatically when a CD is inserted if
the ignition switch is ‘‘ON’’.
• When the disc is ejected from the CD slot, remove it within 10
seconds; otherwise, the disc will be reloaded automatically.
• ID3 Tags are not supported for WMA files.
Track Search
Press the TUN/ TRK during CD mode. Track numbers appear
in the display window.
: Playback starts from the beginning of the next track.
: Playback starts from the beginning of the current track.
Press again to play the previous track.
Album(Folder) Search
Press the FOLDER + or FOLDER – during CD mode. Folder indica-
tor “ ” flashes in the display window.
FOLDER + : Playback starts from the beginning of the next folder.
FOLDER – : Playback starts from the beginning of the previous
folder.
Cue / Review
Press and hold the TUN/ TRK . Release when you have found
the desired point.
: To search forward.
: To search backward.
Scan / Folder Scan Play
Scan Play (Mode1)
Press the
SC/PS during CD mode.
The ‘‘SCAN 1 ON’’ appears in the display window. This will
play the first 10 seconds of all the tracks on the disc.
Press the
SC/PS again to cancel this feature.
Folder Scan Play (Mode2)
Press the
SC/PS for more than 2 seconds during CD mode.
The ‘‘SCAN 2 ON’’ appears in the display window. This will
play the first 10 seconds of first tracks in each folder.
Press the
SC/PS again to cancel this feature.
Repeat / Folder Repeat Play
Repeat Play (Mode1)
Press the
5/RPT during CD mode.
The ‘‘RPT 1 ON’’ appears in the display window and the cur-
rent track is played repeatedly.
Press the
5/RPT again to cancel this feature.
Folder Repeat Play (Mode2)
Press the
5/RPT for more than 2 seconds during CD mode.
The ‘‘RPT 2 ON’’ appears in the display window and the cur-
rent folder is played repeatedly.
Press the
5/RPT again to cancel this feature.
Mix Play / Folder Mix
Mix Play (Mode1)
Press the
4/MIX during CD mode.
The ‘‘MIX 1 ON’’ appears in the display window.
All the tracks on the current folder are played in random or-
der. Press the
4/MIX again to cancel this feature.
Folder Mix Play (Mode2)
Press the
4/MIX for more than 2 seconds during CD mode.
The ‘‘MIX 2 ON’’ appears in the display window.
All the tracks on the current disc are played in random order.
Press the
4/MIX again to cancel this feature.
ID3 Tag Jump
When a file containing an ID3 Tag is played, pressing 3/JUMP
immediately switches the unit to ID3 Tag scroll display.
When the scroll display finishes, the original display is restored.
When pressed
3/JUMP while scroll display has priority, the origi-
nal display is restored after displaying “TRACK/TIME” for five
seconds.
Tip
When playing a file that does not contain an ID3 Tag or when
playing a WMA file, pressing
3/JUMP causes “NO NAME” to be
displayed.
MP3000_body_en 9/4/01, 4:24 PM 12