Blaupunkt MP3000 - Manual (Page 11)

ENGLISH
E-10
Storing the station names
You can assign a name to each radio station and store it in
memory. As much as 30 station names can be stored com-
posed with 12 characters each.
Storing the station names
1. Tune in a station whose name you want to store.
2. Press the DISP for more than 2 seconds.
The “NAME EDIT” will light then the “_ _ _ _ _ _ _ _ _ _ _
_” on the display window. The first “ _ ” flashes.
3. Enter the characters.
A. Rotate the dial in a clockwise direction to select the
desired characters.
(A~Z, a~z, 0~9, ( )
∗ + , − . / !
” # $ % & ’ : ;
< = > ?
@ [ \ ] ˆ _ ` {  } ˜ )
B. Press the TUN/ TRK to move the flashing cursor to
the next position. If you press TUN/ TRK , the flashing
cursor moves to the left.
C. Repeat steps A. and B. to complete entering the en-
tire name 12 characters max.
Tips
•
To erase/correct a name, press the DISP for more
than 2 seconds to clear the character and re-enter.
• When entering a name, pressing the following but-
tons affects the display of characters as follows:
1 : Changes to inputting letters. (Starts with “A”.)
If pressed while letters are already selected,
switches between upper and lower case letters.
2 : Changes to inputting numbers. (Starts with “0”.)
3 : Changes to inputting symbols. (Starts with “(”.)
6 : Enters a space (blank).
4. Press the MUTE / SENS to store the station name.
The station name flashes.
5. To return to the normal radio reception, Press DISP .
Note
If you try to store more than 30 station names, “✳✳FULL✳✳”
will be displayed.
Erasing the station names
1. Tune in any station and press the DISP for more than 2
seconds.
2. Press the MUTE / SENS .
The station name or “ _ _ _ _ _ _ _ _ _ _ _ _ ” flashing.
3. Rotate the dial to select the name of the station that you
want to erase. To erase all the names of the stations, dis-
play “
✳ ALL DELETE ✳ ”.
4. Press the DISP for more than 2 seconds.
Repeat steps 3. and 4. if you want to erase other names.
5. To return to the normal radio reception, Press DISP .
Direct Access to Memorized Stations via
Station call
You can search for the memorized AM & FM station names in
the memory.
1. Press the DISP to display the “STATION CALL” on the
display window.
2. Rotate the large dial to select the desired station name.
3. Press the MUTE / SENS to tune in the desired station.
MP3000_body_en 9/4/01, 4:24 PM 10