beautypg.com

Cd functions, Cd operations, Playing the cd player – Blaupunkt MP3000 User Manual

Page 12

background image

ENGLISH

E-11

Listening to a disc that is already loaded

Press the

CD

to select the CD mode.

Playback begins automatically.

Pausing Playback

Press the

6/

.

To resume playback, press the

6/

again.

Stopping Playback

Press the

BND / TS

to select the radio reception (FM1,FM2,

FMT or AM, AMT).

Ejecting Discs

Press the

to eject the disc located behind flip-down front

panel.

Notes

• The unit will turn on automatically when a CD is inserted if

the ignition switch is ‘‘ON’’.

• When the disc is ejected from the CD slot, remove it within

10 seconds; otherwise, the disc will be reloaded automati-
cally.

Track Search

Press the

TUN/ TRK

during CD mode. Track numbers appear

in the display window.

: Playback starts from the beginning of the next track.

: Playback starts from the beginning of the current track.

Press again to play the previous track.

Cue / Review

Press and hold the

TUN/ TRK

. Release when you have found

the desired point.

: To search forward.

: To search backward.

Scan Play

Press the

SC/PS

during CD mode.

The ‘‘SCAN 1’’ indicator appears in the display window. This
will play the first 10 seconds of all the tracks on the disc.
Press the

SC/PS

again to cancel this feature.

Repeat Play

Press the

5/RPT

during CD mode.

The ‘‘RPT 1’’ indicator appears in the display window and the
current track is played repeatedly.
Press the

5/RPT

again to cancel this feature.

Mix Play

Press the

4/MIX

during CD mode.

The ‘‘MIX 1’’ indicator appears in the display window.
All the tracks on the current disc are played in random order.
Press the

4/MIX

again to cancel this feature.

Note

If the Mix, Repeat or Scan buttons are pressed for 2 seconds
or longer while playing a music CD, the unit will enter the
respective mode2. These modes can be used for playing MP3
discs which contain a number of folders. (See page 12.)
Since a music CD is treated as a folder, there is almost no
difference in the operation.

CD Operations

Playing the CD player

Loading Discs

1.

Press the

OPEN

and insert the disc.

2.

Close the front panel. ‘‘LOADING’’ and ‘‘FILE CHECK’’ will
appear in the display window.
Playback begins automatically.

Note

Make sure that the front panel is closed when playback be-
gins.

Playback with the front panel open causes the
unit to turn off automatically in about 10 min-
utes.

! NEVER Insert a 3-inch CD !

This unit is designed for playback of standard 5-inch CD’s
only. Do not attempt to use 3-inch CD singles in this unit,
either with or without an adaptor, as damage to the player
and/or disc may occur.

Tips
• When a CD is loaded, the

on the display remains lit.

• During playback of a CD, the pie-shaped signal-strength

meter

spins.

Labeled side up

MP3000_body_en

9/4/01, 4:24 PM

11