Bajaj Electricals DB30 - Manual (Page 6)

3
SAFE OPERATION
Rules for Safe Operation
· A pre-operation check must be conducted, before starting the engine, insure
safety, prevent mishaps, and damage to components.
· It is strongly suggested that all operators take a certified motorcycle rider’s
course prior to operating the vehicle.
· Full attention is required during driving; paying close attention to the
following points to avoid any injury to you by other motorized vehicles:
· Do not drive too close to other vehicles.
· Never carry a passenger. This mini bike is for one operator only
· Never operate this mini bike at night. Night is defined as the period of time 30
minutes before sunset to 30 minutes after sunrise.
· Driving at high speeds is the cause of many accidents; do not drive at a speed
that the actual situation does not permit.
SAFETY
ITEM TO CHECK CONTENT
Steering Smoothness; No restriction of movement; No play or looseness
Brakes Proper brake lever free play; enough brake force
Tires Proper air pressure; Enough tread depth; No cracks, rips, or
other damages
Fuel Enough fuel for the intended trip; Fuel hose connected securely;
No damage to fuel tank or cap; Fuel tank cap closed securely
Engine stop switch Proper operation
Engine oil Proper level – Check oil by inspecting Engine Oil Dip Stick.
The engine oil should be between the Minimum and Maximum
lines.
Throttle Proper free play of throttle lever; smooth response; quick
return to idle position
General condition Bolts and nuts are tight; no rattle from any parts of the engine
when running, no visible evidence of Damage