Behringer MIC100 - Manual (Page 5)

5
TUBE ULTRAGAIN MIC100
Use the balanced XLR INPUT to connect your microphone.
+
In contrast to its outputs, the MIC100’s inputs should
never be used simultaneously!
2.2 User interface
Fig. 2.2: User interface of the MIC100
The GAIN control allows applying gain from +26 to +60 dB to the
input signal. This control should be set fully counterclockwise
when (dis)connecting a sound source to the MIC100. When all
connections are made, slowly start raising gain.
We recommend using the LED meter to adjust gain. The
LED chain displays the output signal level in dB. Please make
sure that the clip LED never lights up permanently. It should
light up only at peak signals, but never all the time.
2. CONTROL ELEMENTS