Pioneer RS-D7R - Manual (Page 63)

• To cancel a Road Traffic Flash or Transport Flash interruption and return
to the original source, press the TA button during an Announcement inter-
ruption.
Note:
• You can also switch in order between interrupting Announcements. (Refer to “Switching
Interrupting Announcements” on page 64.)
7 TP Alarm function
When the following conditions arise, the “
3
TRAFFIC ” indicator turns to “T”, and after 30
seconds, the TP Alarm beeps for 10 seconds, reminding you to select a Service Component
supporting Road Traffic Flash and Transport Flash.
• When Road Traffic Flash and Transport Flash interruption setting is ON.
• When the Service Follow Function is ON.
• When this unit (during DAB reception) cannot clearly receive a Service Component
supporting Road Traffic Flash and Transport Flash.
• When this unit RDS cannot receive a TP or enhanced other network’s TP station broad-
cast.
• When listening to a DAB broadcast, after hearing the TP Alarm, you should
re-tune to a Service that supports Road Traffic Flash and Transport Flash if
you want to continue the possibility to receive them.
When listening to any other sources, 30 seconds after the “
3
TRAFFIC ” indicator turns to
“T”, search automatically starts for a Service Component in that area that supports Road
Traffic Flash and Transport Flash.
62
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS