Pioneer RS-D7R - Manual (Page 22)

21
Setting Up the Environment for Use
Switching the Auto PI Seek
During Preset Station PI Seek operation, you can switch the Auto PI Seek function
ON/OFF. (Refer to “PI Seek function” on page 30.)
Changing the FM Tuning Step
Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to
100 kHz when the AF or TA mode is activated.
It may be preferable to set tuning step to 50 kHz in the AF mode.
Note:
• The tuning step remains set at 50 kHz during Manual tuning.
• The tuning step returns to 100 kHz if the battery is temporarily disconnected.
Returns to the Initial Setting Screen
• Press the RETURN button.
The display returns to Initial Setting
Screen.
• Press the FUNCTION button 6
on General Environment Setting
Screen selects the desired tuning
step.
• Press the FUNCTION button 5
on General Environment Setting
Screen switches the Auto PI
Seek ON/OFF.