English, Osd (on screen display) controls – Pioneer PDP-615EX User Manual

Page 22

English

OSD (On Screen Display) Controls

Adjusting the colors
Use this procedure to adjust hue and color density for red,
green, blue, yellow, magenta and cyan.
You can accentuate the green color of trees, the blue of
the sky, etc.

Example: Adjusting the color management for blue

On “PICTURE” menu, select “COLOR MGT”, then press
the MENU/SET button.
The “COLOR MGT” screen appears.
On “BLUE” of “COLOR MGT”, adjust the color
management.

SEL.

ADJ.

EXIT RETURN

C O L O R M G T

R E D
G R E E N
B L U E
Y E L L O W
M A G E N TA
C YA N
R E S E T

: O F F

Information
Ⅵ COLOR MGT settings
RED: Makes red’s adjustment
GREEN: Makes green’s adjustment
BLUE: Makes blue’s adjustment
YELLOW: Makes yellow’s adjustment
MAGENTA: Makes magenta’s adjustment
CYAN: Makes cyan’s adjustment
RESET: Resets settings to the factory default value.
Use

ᮤ

and

ᮣ

buttons to select “ON”, then press the

MENU/SET button.

Adjusting the pedestal level (black level)
This feature adjusts the video black level in a video image.

Example: Setting “3.75”

On “SET UP LEVEL” of “PICTURE” menu, select “3.75”.

EXIT RETURN

SEL.

ADJ.

P I C T U R E

P I C T U R E M E M O RY
C O N T R A S T
B R I G H T N E S S
S H A R P N E S S
C O L O R
T I N T
D N R
C O L O R T E M P.
G A M M A
L O W TO N E
S E T U P L E V E L
C O L O R M G T
P U R E C I N E M A
AV S E L E C T I O N

: O F F

: L O W
: M I D D L E
: 2 . 1
: A U TO
: 3 . 7 5

: O N
: D Y N A M I C

Information
Ⅵ SET UP LEVEL settings
0: Normal status
3.75: 3.75% lower than normal
7.5: 7.5% lower than normal

Setting the picture to suit the movie
The film image is automatically discriminated and
projected in an image mode suited to the picture.
[NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I
(50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]

Example: Setting the “PURECINEMA” to “OFF”

On “PURECINEMA” of “PICTURE” menu, select “OFF”.

EXIT RETURN

SEL.

ADJ.

P I C T U R E

: O F F

: L O W
: M I D D L E
: 2 . 1
: A U TO
: 0

: O F F
: D Y N A M I C

Information
Ⅵ PURECINEMA
ON: Automatic discrimination of the image and
projection in PURECINEMA.
OFF: PURECINEMA does not function.

Setting the picture modes according to the
brightness of the room
There are four picture modes that can be used effectively
according to the environment in which you are viewing
the display.

Example: Setting the “MOVIE1” mode

On “AV SELECTION” of “PICTURE” menu, select
“MOVIE1”.

EXIT RETURN

SEL.

ADJ.

P I C T U R E

: O F F

: L O W
: M I D D L E
: 2 . 1
: A U TO
: 0

: O N
: D Y N A M I C

AV S E L E C T I O N

: M O V I E 1

Information
Ⅵ Types of AV SELECTION
MOVIE1, 2: Set this mode when watching video in a dark
room.
This mode provides darker, finer pictures, like the screen
in movie theaters.
For a darker image, select MOVIE2.
STANDARD: Set this mode when watching video in a
bright room.
This mode provides pictures with distinct differences
between light and dark sections.
DYNAMIC: This mode provides brighter pictures than
STANDARD.
DEFAULT: Use this to reset the picture to the factory
default settings.
STANDARD is the default setting when PC signal is
input.