Pioneer RS-A99 - Manual (Page 10)

Two-channel output (Stereo)
2
1
1 Speaker (Left)
2 Speaker (Right)
Two-channel output (Mono)
1
1
1 Speaker (Mono)
Connections when using
the RCA input jack
Connect the car stereo RCA output jack and
the RCA input jack of the amplifier.
Four-channel / Three-channel output
! Slide INPUT SELECT (input select) switch
to 4CH position.
! Set the LEFT CHANNEL (left channel) and
RIGHT CHANNEL (right channel) switches
to the same position.
1
2
3
4
1 RCA input jack A
2 RCA input jack B
3 Connecting wires with RCA plugs (sold sepa-
rately)
4 From RS-P99 (sold separately) etc. (RCA out-
put)
If only one input plug is used, connect the
plug to RCA input jack A rather than B.
Two-channel output (Stereo) / (Mono)
! Slide INPUT SELECT (input select) switch
to 2CH position.
! Set the LEFT CHANNEL (left channel) and
RIGHT CHANNEL (right channel) switches
to the same position.
1
2
3
1 RCA input jack A
For two-channel output, connect the RCA
plugs to the RCA input jack A.
En
10
Section
03 Connecting the units