Tuner, Operating this unit – Pioneer DEH-X6500DAB User Manual

Page 5

Pausing

You can use the pause function to temporarily
stop listening to a DAB.

% Press DAB to pause or resume.

! This unit stores recent broadcasts to memory

automatically. The memory capacity of this
unit will vary depending on the bit rate of the
Service Component used. The approximate
memory capacity is five minutes for 192 kbps.

! If the duration that a selection is paused ex-

ceeds the length of the memory capacity,
playback will resume from the beginning of
the selection in memory.

This function is disabled while time shift is on.
For more details about time shift, refer to Listen-
ing to a recent broadcast (time shift) on this
page.

Storing and recalling stations
for each band

Using preset tuning buttons

When you find a station that you want

to store in memory, press one of the preset
tuning buttons (1/

to 6/

) and hold until

the preset number stops flashing.

Press one of the preset tuning buttons

(1/

to 6/

) to select the desired station.

Switching the display

Selecting the desired text information
1 Press DISP to cycle between the following:

! SERVICE LABEL (service label or channel)
! BRDCST INFO (service label/PTY label/en-

semble label/channel and frequency)

! DYNAMIC LABEL (dynamic label)
! CLOCK (source name and clock)

Notes

! If the service label cannot be acquired in

SERVICE LABEL, the channel is displayed in-
stead. If the service label is detected, the
service label will be displayed.

! BRDCST INFO text information will change

automatically.

! For more details about PTY list, refer to PTY

list on the next page.

! This function is disabled while pausing. For

more details about pausing, refer to Pausing
on this page.

! Depending on the band, text information can

be changed.

! Text information items that can be changed

depend on the area.

Listening to a recent broadcast
(time shift)

You can navigate through recent broadcasts
from the selected Service Component.

Press

/DIMMER to switch to time shift

mode.
Press again to resume the live broadcast.

Press c or d to adjust the playback point.

! Press c to skip back one minute.
! Press d to skip forward one minute.

This unit stores recent broadcasts to memory
automatically. The memory capacity of this unit
will vary depending on the bit rate of the Service
Component used. The approximate memory ca-
pacity is five minutes for 192 kbps.
Stored selections that are older than what can
be stored in the memory will not be available.

Selecting a Service Component

You can select a Service Component from the
following service list.

Press

(list) to switch to the service list

mode.

Turn M.C. to change the service list and

press to select.
Once selected, the following Service Component
functions can be adjusted.

SERVICE (service label)

You can select a Service Component from the list
of all components.
1 Turn M.C. to select a Service Component.
2 Press M.C. to receive a broadcast from the se-

lected Service Component.

Using alphabet search
1 Press

(list).

2 Turn M.C. to select a letter.
3 Press M.C. to display the alphabetical list.
4 Turn M.C. to select a Service Component.
5 Press M.C. to receive a broadcast from the se-

lected Service Component.

PROGRAM TYPE (PTY label)

You can select a Service Component from PTY in-
formation.
1 Turn M.C. to scroll to the desired PTY informa-

tion and press it to select.
NEWS/INFO

—POPULAR—CLASSICS—

OTHERS

2 Turn M.C. to select a Service Component.
3 Press M.C. to receive a broadcast from the se-

lected Service Component.

ENSEMBLE (ensemble label)

You can select a Service Component from the rele-
vant ensemble.
1 Turn M.C. to scroll to the desired ensemble

and press it to select.

2 Turn M.C. to select a Service Component.
3 Press M.C. to receive a broadcast from the se-

lected Service Component.

Updating service list information

You can receive updates to the service list.

% Press and hold down

(list).

To cancel, press

(list) again.

Function settings

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select FUNCTION.
Once selected, the function below can be ad-
justed.

S.FOLLOW (alternative Service Component
search)

If the tuner cannot get good reception, the unit
will automatically search for another ensemble
that supports the same Service Component. If no
alternative Service Component can be found or re-
ception remains poor, this function will automati-
cally switch to an identical FM broadcast.
1 Press M.C. to turn alternative Service Compo-

nent search on or off.

Tuner

Basic operations

Selecting a band
1 Press BAND/ until the desired band (FM1,

FM2,FM3 for FM or MW/LW) is displayed.

Switching preset stations
1 Press c or d.
! Select PCH (preset channel) under SEEK to

use this function. For details about the set-
tings, refer to

SEEK (left/right key setting) on

page 7.

English

Operating this unit

Section

Operating this unit