Pioneer AVH-P4000DVD - Manual (Page 47)

! If the display should be switched to a rear
view camera video by error while you are
driving forward, change the rear view cam-
era setting.
! To end watching a rear view camera video
and return to the source display, press and
hold
VOLUME/MUTE.
! Even while driving, rear view camera image
can be displayed. To do this, touch
REARVIEW source icon. In this case, touch
REARVIEW again to turn off the rear view
camera. For details, refer to Selecting a
source on page 15.
% Touch CAMERA POLARITY on the sys-
tem menu to select an appropriate setting.
! BATTERY – When the polarity of the con-
nected lead is positive while the gear shift
is in REVERSE (R) position
! GROUND – When the polarity of the con-
nected lead is negative while the gear shift
is in REVERSE (R) position
! OFF – When a rear view camera is not con-
nected to this unit
Switching the iPod charge setting
You can turn the iPod charge setting on or off
while listening to an iPod.
! Listening MW radio while an iPod is
charged from this unit may generate noise.
In this case, turn the iPod charge setting
off and noise is disappeared.
! Initially, this function is set to on.
1 Touch NEXT on the system menu.
2 Touch iPod CHARGE to turn the iPod
charge setting on.
# To turn the iPod charge setting off, touch
iPod CHARGE again.
Note
For maximum performance, we recommend that
you use the latest version of the iPod software.
Selecting the OSD color
You can change the OSD color.
% Touch OSD COLOR to select the desired
color.
Each time you touch
OSD COLOR it selects
colors in the following order:
BLUE (blue)
—RED (red)—AMBER (amber)—
GREEN (green)
—VIOLET (violet)
Selecting the illumination color
This unit is equipped with multiple-color illu-
mination. You can select a desired color from
112 different types of color.
Direct selection from preset
illumination color
You can select an illumination color from the
color list.
1 Touch ILLUMI COLOR to display the set-
ting menu.
2 Touch one of the color list.
You can select one from the following list.
! BLUE (blue)
! RED (red)
! AMBER (amber)
! GREEN (green)
! VIOLET (violet)
! SCAN (scanning all colors)
Note
SCAN setting cycles continuously through all the
colors.
Customizing the illumination color
1 Touch ILLUMI COLOR to display the set-
ting menu.
2 Touch to display the customizing
menu.
3 Rotate VOLUME/MUTE to customize
the color.
Operating this unit
En
47
Section
03
Operating
this
unit