Pioneer MCS-333 - Manual (Page 34)

Playback 34
Pla
yback
4
Chapter 4
Playback
Playing discs or files
This section describes the player’s main
operations.
For the types of discs and files that can be
played, see page 10. Video, image and audio
files recorded on discs are played with the
Home Media Gallery (page 43).
1. Press  STANDBY/ON to turn on the
power.
Turn the TV’s power on and switch its input
beforehand.
2. Press  OPEN/CLOSE to open the disc
tray and load the disc.
Note
y Load the disc with the printed side facing up.
y Several dozen seconds are required to read
the disc. Once reading is completed, the type
of disc is displayed on the player’s front panel
display.
y When a BD with usage restrictions set by a BD
recorder is loaded, the PIN code input screen
appears. In this case, input your PIN code.
3. Press  PLAY to play the disc.
y To pause, press  PAUSE during playback.
y To stop, press  STOP during playback.
Note
y Some discs start playing automatically when
the disc tray is closed.
y BD-ROM/DVD-Video discs have parental lock
features. Input the password registered in the
player’s settings to unlock the parental lock.
For details, see page 60.
y BD-R/-RE may have restrictions placed on the
disc or titles. Enter the password set to the disc
in order to remove the restrictions.
 If the disc menu is displayed
For some discs, the disc menu is displayed
automatically when playback starts. The
contents of the disc menu and the way to
operate depend on the disc.
 Resuming playback from where it was
stopped (resume playback function)
y When  STOP is pressed during
playback, the point at which the disc
stopped is stored in the memory. When

PLAY is pressed after that, playback
resumes from that point.
y To cancel the resume playback function,
press  STOP while playback is stopped.
Note
y The resume playback function is canceled
automatically in the following cases:
– When the disc tray is opened.
– When the file list window is switched.
– When the power is turned off. (For BDs
and DVDs this does not cancel the resume
playback function.)
y When you want to continue playback from a
position you specify to be played next time, see
Continuing playback from a specified position
(Continued Viewing Playback) on page 42.
y The resume playback function cannot be used
for some discs.
 Playback disc/file when selecting
other functions
1. Press  OPEN/CLOSE to open the disc
tray and load the disc.
2. Press HOME MEDIA GALLERY to
display the Home Media Gallery.
3. Select disc type (BDMV/BDAV/DVD
etc.).