Switching, Correcting distorted sound, Switching the sound muting/attenuation – Pioneer AVH-P6600DVD User Manual

Page 97: Switching the automatic disc playback, Initialsettings

or subwoofer output (refer to Using subwoofer
output on page 75) in the audio menu on.

! If you change the subwoofer controller, sub-

woofer output and nonfading output in the
audio menu return to the factory settings.

! Both rear speaker leads output and RCA rear

output are switched simultaneously in this
setting.

Correcting distorted sound

You can minimize distortion that may be

caused by the equalizer curve settings.

Setting an equalizer level high can cause dis-

tortion. If high sound is crippled or distorted,

try switching to LOW. Normally, leave the set-

ting at HIGH to ensure quality sound.

! Only when the multi-channel processor

(e.g., DEQ-P6600) is connected to this unit,

you can operate this function.

1 Touch A.MENU and INITIAL and then

touch NEXT.

2 Touch DIGITAL ATT.

3 Touch

to switch the digital at-

tenuator setting.

Touch

to select low setting and LOW ap-

pears in the display. Touch

to select high

setting and HIGH appears in the display.

Switching the sound

muting/attenuation

Sound from this system is muted, attenuated

or mixed automatically in the following cases:

! When a call is made or received using a

cellular telephone connected to this unit.

! When the voice guidance is output from a

Pioneer navigation unit connected to this

unit.

1 Touch A.MENU and INITIAL and then

touch NEXT.

2 Touch TEL/GUIDE.

3 Touch

to select any of the mut-

ing, attenuation or mixing.

Touch

until the desired setting ap-

pears in the display.

! MUTE Muting
! ATT 20dB Attenuation (ATT 20dB has a

stronger effect than ATT 10dB)

! ATT 10dB Attenuation

Notes

! The sound is turned off, MUTE or ATT is dis-

played and no audio adjustment is possible.

! Operation returns to normal when the phone

connection or the voice guidance is ended.

Switching the automatic

disc playback

You can turn automatic disc playback on or off

when you insert a disc into the disc loading

slot. When this function is on, the disc will be

automatically played after it is inserted into

the disc loading slot.

Initially, this function is set to on.

1 Touch A.MENU and INITIAL and then

touch NEXT.

2 Touch DVD DISC AUTO.

InitialSettings

Section

InitialSettings