Using the position selector, Using balance adjustment, Digitalsignalprocessor – Pioneer AVH-P6600DVD User Manual

Page 79

into the SFC circuitry to recreate the acous-

tics of various performance settings.

1 Press EQ and hold to switch to SFC

function.

Press EQ and hold until SFC appears in the

display.

# To switch to equalizer function, press EQ and
hold again.

2 Press EQ to select the desired SFC

mode.

Press EQ repeatedly to switch between the fol-

lowing mode:

MUSICAL (musical)DRAMA (drama)

ACTION (action)JAZZ (jazz)HALL (hall)

CLUB (club)OFF (off)

Note

If the source is a 2-channel LPCM audio or a 2-
channel Dolby Digital audio and you select SFC
effects that are most applicable for 5.1-channel
audio (i.e., MUSICAL, DRAMA or ACTION), we
recommend turning Dolby Pro Logic on. On the
other hand, when selecting SFC effects that are
intended for use with 2-channel audio (i.e., JAZZ,
HALL or CLUB), we recommend turning Dolby
Pro Logic off.

Using the position selector

One way to assure a more natural sound is to

accurately position the stereo image, putting

you right in the center of the sound field. The

position selector function lets you automati-

cally adjust the speaker output levels and in-

serts a delay time to match the number and

position of occupied seats. When used in con-

junction with the SFC, the feature will make

the sound image more natural and offer a pa-

noramic sound that envelops you.

1 Touch A.MENU and DSP and then touch

POSITION.

2 Touch c/d/a/b to select a listening po-

sition.

Touch one of these, c/d/a/b, to select a lis-

tening position as listed in the table.

Key

Display

Position

FRONT-L

Front seat left

FRONT-R

Front seat right

FRONT

Front seats

ALL

All seats

# To cancel the selected listening position,
touch the same key again.

Note

When you make adjustments for listening posi-
tion, the speakers are automatically set for appro-
priate output levels. You can tailor them if you
want as discussed under the heading of Adjust-
ing the speaker output levels using a test tone or
Adjusting the speaker output levels.

Using balance adjustment

You can select a fader/balance setting that

provides an ideal listening environment in all

occupied seats.

1 Touch A.MENU and DSP and then touch

FADER/BALANCE.

2 Touch a or b to adjust front/rear

speaker balance.

Each time you touch a or b it moves the

front/rear speaker balance towards the front or

the rear.

FRONT:25 REAR:25 is displayed as the front/

rear speaker balance moves from front to rear.

DigitalSignalProcessor

Section

DigitalSignalProces

sor