Pioneer AVH-P4000DVD - Manual (Page 29)

! This function is available for CD and com-
pressed audio disc.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Touch SCAN on the function menu to
turn scan play on.
The first 10 seconds of each track is played.
3 When you find the desired track (or
folder) touch SCAN again.
Note
After track or folder scanning is finished, normal
playback of the tracks will begin again.
Selecting audio output
When playing DVD video discs recorded with
LPCM audio, you can switch the audio output.
When playing Video CD discs, you can switch
between stereo and monaural audio output.
! This function is available for DVD and
Video CD.
! This function is not possible when disc
playback has been stopped.
! If you select Linear PCM, when playing a
disc recorded on a dual mono mode, you
can operate this function. (Refer to Setting
for digital output on page 41.)
% Touch L/R SELECT on the function menu
to select the audio output.
Touch
L/R SELECT repeatedly until the desired
audio output appears in the display.
! L+R – left and right
! LEFT – left
! RIGHT – right
! MIX – mixing left and right
Note
Depending on the disc and the playback location
on the disc, the function may not be selectable,
indicating that operating this function is not pos-
sible.
Using compression
Using the COMP (compression) function lets
you adjust the sound playback quality of this
unit.
% Touch COMPRESSION on the function
menu to select your favorite setting.
OFF
—COMP1—COMP2
Operating this unit
En
29
Section
03
Operating
this
unit