Pioneer AVH-P4000DVD - Manual (Page 16)

Radio
Basic Operations
This unit
’s AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 18).
RDS
RDS (radio data system) contains inaudible in-
formation that helps search for the radio sta-
tions.
! RDS service may not be provided by all sta-
tions.
! RDS functions such as AF and TA are only
active when your radio is tuned to an RDS
station.
2 2 2
7
1 1 1 3 3 3 4 4 4
9 5 6 8
1 Source icon
2 Band indicator
3 Preset number indicator
4 Program service name
5 NEWS indicator
Appears when the set news program is re-
ceived.
6 TRAFFIC indicator
Appears when a TP station is tuned in.
7 TEXT indicator
Shows when the radio text is received.
8 PTY label indicator
9 5 (stereo) indicator
Appears when the selected frequency is being
broadcast in stereo.
Non-RDS or MW/LW
2 2 2
5
1 1 1 3 3 3 4 4 4
6
1 Source icon
2 Band indicator
3 Preset number indicator
4 Frequency indicator
5 LOCAL indicator
Appears when local seek tuning is on.
6 5 (stereo) indicator
Appears when the selected frequency is being
broadcast in stereo.
1 Touch the source icon and then touch
RADIO to select the radio.
2 Touch BAND to select a band.
Touch BAND until the desired band (FM1,
FM2, FM3 for FM or MW/LW) is displayed.
3 To perform manual tuning, briefly
touch c or d.
4 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the key.
Operating this unit
En
16
Section
03