BT 1015 EN - Manual (Page 36)

KEYPAD
Enter the system code for the
base to which you are attempting
to register.
Press OK . After a few seconds
the Deskphone will display all
available internal numbers.
KEYPAD
Press a number button
corresponding to one of the free
internal numbers displayed.
Press OK .
The Deskphone is now registered
with the base station and the base
station name displayed when in
idle state.
Press keypad buttons in order shown
Once you have registered your
Deskphone to additional base
stations you can also set it to find
the strongest base station signal
automatically, each time you
make a call.
Press the MENU button.
Highlight SELECT BASE.
Press OK .
Use DOWN to highlight BEST BASE.
Press OK . Automatic base
selection is set.
O K
▼
O K
ᮣ
O K
O K
4
If you are using your phone in
an area where two base signals
overlap, we recommend that you
specify a preferred base signal
for your telephone to search for
first. If the phone does not find
a clear signal from this base it
will then resort to finding an
alternative signal.
Press the MENU button.
Highlight SELECT BASE.
Press OK .
Use DOWN to find the base
station that you want as first
choice (i.e. BASE 1
).
Press ACTIVATE .
Select PRIORITY SELECTION.
Press OK . Priority selection is set.
If you want your telephone to
search for only one base, and not
switch to searching for a better
signal, select FIXED SELECTION
instead of PRIORITY SELECT.
For instructions on how to use
multibase operation with Diverse
ISDN, please refer to your base
stations user guide.
O K
+
▼
O K
▼
ᮣ
To set the Diverse Deskphone
to select the best base station
signal
To set the Diverse Deskphone
to search for a specific base
signal