BT 1015 EN - Manual (Page 15)

13
Making and receiving
external calls
Press keypad buttons in order shown
Lift the handset and dial the
number.
Or,
KEYPAD
Enter the number on the keypad,
check that it is correct and
then lift the handset to dial.
If you make a mistake entering
numbers, use
DELETE to delete
them.
Replace the handset on the cradle.
➔
This allows you to talk without
holding the handset.
Press LOUDSPEAKER before or
after dialling the number.
Or during a call
Press and hold the
LOUDSPEAKER button whilst
replacing the handset on the base,
then release the loudspeaker
button.
You can adjust the loudspeaker/
handset volume during a call with
+ / – buttons on the Deskphone.
–
+
Using the
Diverse Deskphone
Please note
If another handset or Deskphone is
already in use and all available lines are
in use, you will hear an engaged tone
when attempting to dial out.
Please note
If you wish to switch to loudspeaker
during a call, press and hold down the
LOUDSPEAKER button and do not
release it until you have placed the
handset in the cradle.
If you fail to hold down the
LOUDSPEAKER button, the call will
be disconnected.
To make an external call
To use the loudspeaker
To end a call
BASIC FUNCTIONS