Pioneer AVIC-F50BT - Manual (Page 17)

Connecting and
disconnecting an iPod
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! Pioneer cannot guarantee compatibility with
all USB mass storage devices and assumes
no responsibility for any loss of data on media
players, iPhone, smartphone, or other devices
while using this product.
Connecting your iPod
1 Check that no USB storage device is
connected.
2 Connect your iPod.
Lightning Digital AV Adapter
HDMI/USB interface
cable for iPod /
iPhone Lightning to USB
cable
= For details of the operations, refer to the lat-
est Installation Manual.
The latest manual is available on our web-
site.
http://www.pioneer.eu
Disconnecting your iPod
% Pull out the cables after confirming
that no data is being accessed.
Using an iPod (iPod)
Starting procedure
1 Set
“iPod Connection Settings” to “30-
pin Connector
”.
= For details, refer to Selecting the device con-
nection method on page 20.
= For details, refer to Setting the iPod connec-
tion on page 21.
2 Press the MODE button when the map
screen is displayed.
p The AV operation screen can also be dis-
played by touching [ AV Source] on the
“Top Menu”.
3 Connect your iPod.
The source changes and then playback will
start.
= For details, refer to Connecting your iPod on
page 17.
p If the iPod is already connected, touch
[ iPod] on the left edge of the screen.
p If connecting an iPhone or iPod touch, quit
applications before connecting.
4 Use the touch panel keys on the screen
to control your iPod.
p The video image of the iPod may have noise
if the rear display outputs the video image.
When noise is produced in the video image
of the iPod, turn off the output setting of the
rear display.
Using Aha Radio
Starting procedure
The procedure varies depending on the type of
device.
Engb
17
English
Chapter
05 Changes on the upgraded programme