Pioneer PDP-42RXE - Manual (Page 37)

10 Enjoying through External Equipment
English
37
En
Connecting to the HDMI Input
HDMI
AUDIO HDMI
L
R
The digital video and audio signals can be input to the HDMI
terminal. To use the HDMI terminal, activate the terminal and
specify the types of video and audio signals to be received from
the connected equipment. For the types of these signals, refer
to the operation manual supplied with the connected equip-
ment.
Input signal correlation table
1920 ∗1080i@50Hz
720 ∗576p@50Hz
1280 ∗720p@50Hz
1920 ∗[email protected]/60Hz
720 ∗[email protected]/60Hz
1280 ∗[email protected]/60Hz
1 Connect the HDMI cable to the HDMI jack on the Plasma
Display and to the DVD output jack on the required
equipment.
2 When connecting with DVI jack, such as a DVD player,
connect the audio cable to the AUDIO INPUT-L/R jacks
on the Plasma Display and to the audio output jacks on
the required equipment.
3 Turn the Plasma Display on, then press the INPUT
button to select HDMI.
• PC signals are not supported.
• If no image appears, specify another digital video signal type.
• For the digital video signal types to be specified, refer to the opera-
tion manual supplied with the connected equipment.
HDMI Cable
(commercially available)
Audio Cable
(commercially available)
DVD Player
HDMI equipment
11-PDP42RXE-Eng (35-37) 9/30/05, 12:16 PM 37