Setting the full white mode, 09 adjustments and settings, Setting for the ttx (teletext) language – Pioneer PDP-42RXE User Manual
Page 33: Screen saver, English
09
Adjustments and Settings
English
33
En
Setting for the TTX (Teletext) Language
For the language to be used in the Teletext mode, you can select
from the following languages: West Europe, East Europe,
Greece/Turkey, Russia and Arabia.
1
Press the MENU button.
2
Press the c or d button to move to System, then press
the a or OK button.
3
Press the c or d button to move to TTX Language, then
press the a or OK button.
4
Press the c or d button to select the desired language as
follows.
East Europe - West Europe - GRC/TUR - Russia - Arabia
System
Menu Language English
TTX Language East Europe
Clock Setting
Adjust Return
East Europe
West Europe
GRC/TUR
Russia
Arabia
5
Press the EXIT button.
Screen Saver
You can prevent temporary or permanent screen burn caused
by a still image.
1
Press the MENU button.
2
Press the c or d button to move to Screen, then press
the a or OK button.
Screen
Aspect Ratio Full
Main Input ANALOG CH
PIP/TWIN
AV1 Input VIDEO
AV2 Output ANALOG CH
Screen Saver
Move Enter Return
3
Press the c or d button to move to Screen Saver, then
press the a or OK button.
4
Select Orbiter and press the a or OK button again.
Screen Saver
Orbiter On
Orbiter Range Small
Full White Off
On
Off
Adjust Return
5
Press the c or d button to select the required option (On
or Off), then press the b or BACK button.
6
Press the c or d button to move to Orbiter Range, then
press the a or OK button.
7
Press the c or d button to select the required option as
follows, then press the b or BACK button.
Small - Mid - Large
Screen Saver
Orbiter On
Orbiter Range Small
Full White Off
Small
Mid
Large
Adjust Return
8
Press the EXIT button.
Setting the Full White mode
When displaying a still picture for a long time, it is
recommended that you set “
Full White” to “On” to reduce
temporary or permanent screen burn.
1
Follow steps 1 to 3 in “Screen Saver”.
2
Press the c or d button to move to Full White, then
press the a or OK button.
3
Press the c or d button to select “On”.
• If you cancel the Full White mode, press the
EXIT button. It is also
canceled when 20 minutes elapse.
10-PDP42RXE-Eng (28-34)
9/30/05, 12:16 PM
33