Pioneer DEH-4600BT - Manual (Page 21)

2 Turn M.C. to display ILLUMI and press
to select.
3 Turn M.C. to select the illumination
function.
Once selected, the following audio functions
can be adjusted.
KEY COLOUR (key section color setting)
You can select desired colors for the keys of this unit.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the illumination color.
! Preset colors (ranging from WHITE to BLUE)
! SCAN (cycle through a variety of colors auto-
matically)
! CUSTOM (customized illumination color)
DISP COLOUR (display section color setting)
You can select the desired colors for the display of
this unit.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the illumination color.
! Preset colors (ranging from WHITE to BLUE)
! SCAN (cycle through a variety of colors auto-
matically)
! CUSTOM (customized illumination color)
BOTH COLOUR (key and display color setting)
You can select the desired colors for the keys and dis-
play of this unit.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the illumination color.
! Preset colors (ranging from WHITE to BLUE)
! SCAN (cycle through a variety of colors auto-
matically)
PHONE COLOUR (phone color setting)
Selecting the key colors displayed when a call is re-
ceived
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the illumination color.
! FLASHING – The color selected from KEY
COLOUR flashes.
! FLASH MODE1 to FLASH MODE6 – The sys-
tem automatically cycles through all available
key colors for this unit. Select the desired
mode.
! OFF – No change in key color made when in-
coming calls are received.
ILLUMI FX (illumination effect mode)
In this mode, an illumination effect can be seen on
the display at certain times such as when the ACC
power is turned on/off or a CD is inserted/ejected.
1 Press M.C. to turn ILLUMI FX on or off.
! The illumination effect will activate when the ACC
power is turned on/off regardless of whether the
ILLUMI FX setting is on or off.
Note
When CUSTOM is selected, the customized color
saved is selected.
Customizing the illumination color
You can create custom illumination colors for
both
KEY COLOUR and DISP COLOUR.
1 Press M.C. to display the main menu.
2 Turn M.C. to display ILLUMI and press
to select.
3 Turn M.C. to display KEY COLOUR or
DISP COLOUR. Press to select.
4 Press M.C. and hold until the customiz-
ing illumination color setting appears in
the display.
5 Press M.C. to select the primary color.
R (red)
—G (green)—B (blue)
6 Turn M.C. to adjust the brightness level.
Adjustment range: 0 to 60
# You cannot select a level below 20 for all three
of
R (red), G (green), and B (blue) at the same
time.
# You can also perform the same operation on
other colors.
Note
You cannot create a custom illumination color
while
SCAN is selected.
About MIXTRAX
Only for DEH-X5600BT
En
21
Section
02
Using
this
unit
Using this unit