Changing the speaker setup, Closing the speaker settings screen – Pioneer BDP-LX71 User Manual
Page 44
06
44
En
Changing the speaker setup
Set whether or not to use the speakers which are connected to the
AV receiver or amplifier, as well as the size of the speakers. This
setting is only valid for analog audio outputs.
Note
• Select
Initial Setup from the HOME MENU, then press ENTER.
1
Select and set Speakers.
Use
/ to select, then press ENTER.
2
Select and set Speaker Setup
Next Screen.
Use
/ to select, then press ENTER.
Caution
• This cannot be selected when
Audio Output Mode is set to
2 Channel. Change the setting to Multi-channel (page 41).
3
Select the speaker and change the setting.
Use
/ to select, then use / to change the setting.
•
L/R (front left and right speakers): Small/Large (this setting also
applies to the C, SL/SR and SBL/SBR speakers)
•
C (center speaker): Yes/No
•
SL/SR (left and right surround speakers): Yes/No
•
SBL/SBR (left and right surround back speakers): Yes/No
Closing the speaker settings screen
Press
ENTER.
Adjusting the output level of the
various speakers (Channel Level)
Adjust each output level of the different speakers by using test tones.
This setting is only valid for analog audio outputs.
1
Select and set Speakers.
Use
/ to select, then press ENTER.
2
Select and set Channel Level, then Fix or Variable.
Use
/ to select, then press ENTER.
•
Fix – The output level of all the speakers is set to the maximum.
•
Variable – The output level of all the speakers is set 6.0 dB lower
than when
Fix is selected. From this point, the output levels of
the
L, C, R, SL, SR, SBL, SBR and SW speakers can be adjusted
within the range of –6.0 dB to +6.0 dB.
• If you have selected
Variable, proceed to step 3.
Caution
• This cannot be selected when
Audio Output Mode is set to
2 Channel. Change the setting to Multi-channel (page 41).
TOP MENU
TOOLS
HOME
MENU
RETURN
ENTER
Audio Output Mode
Speaker Setup
Channel Level
Multi-channel
Fix
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Setup Navigator
Initial Setup
BD PLAYER
TOP MENU
TOOLS
HOME
MENU
RETURN
ENTER
L/R
C
SL/SR
SBL/SBR
Large
Yes
Yes
Yes
Speaker Setup
BD PLAYER
Use [ ][ ] to select a speaker, then press [ ][ ]
to select speaker option.
TOP MENU
TOOLS
HOME
MENU
RETURN
ENTER
Audio Output Mode
Speaker Setup
Channel Level
Multi-channel
Fix
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Setup Navigator
Initial Setup
BD PLAYER