Pioneer SEP-C1 - Manual (Page 6)

6
En
FEATURES
VARIOUS DJ SOFTWARE CONTROL
The accessory Pioneer DJS software program as well as other DJ
programs can be operated freely without the need for a control
disc. MIDI-type DJ programs are also supported.
HIGH FUNCTION DISPLAY
Center Display
Features a wide 4.3” color LCD display with high luminance for
easy visibility. The intelligent GUI and rotary selector dial allows for
no-stress track selection.
Controller Display A/B
The elapsed time and tempo display feature top-quality, area-color
full-segment OEL displays with high response and terrific visibility.
In concert with the center display, these displays and indicators
encourage no-stress DJ play in a wide variety of lighting
environments.
JOG DIAL
Furnished with large 80 mm jog dial with scratch function,
allowing operations with the same sense of touch as an analog
turntable.
MONITOR OUT
By outputting the center display’s BROWSE screen to a larger
external monitor, operations can be performed with greater ease.
DJS FUNCTION SUPPORT
Using the accessory DJS software program allows not only DJ
play, but a wide variety of other control operations as well,
including track selection and mixing using the center display.
DJ CONTROL
In addition to basic functions like tempo control, cue operations,
and loop play, most DJ play functions of DJS are supported by the
unit including scratch and pitch bend using the jog dial.
TRACK INFORMATION
When playing tracks using DJS, time, title, artist name and other
track information can be shown on the display.
BROWSE CONTROL
The unit can control DJS track lists or play lists. Lists can also be
viewed on the center display and track selection performed
without looking at the computer screen.
MIX CONTROL
The DJS mixer function can be controlled. A single button can be
used to perform mixing, selecting from four mix modes.
EFFECT CONTROL
DJS effects can be controlled. Selection of effects and effect beat
switching, level/tempo adjustment can all be performed using the
unit’s rotary selector and buttons.
MEMO
• Most of the data regarding button and TEMPO adjust slider
operations on this unit can be output to external devices using
USB MIDI or dedicated formats. In order to use this unit to
control DJ software, it is necessary to install a driver program.
MEMO
• When controlling other (non-DJS) brands of DJ software,
consult the individual program’s operating instructions for
information regarding function support.
SEP-C1_EN.book 6 ページ ２００８年３月２４日 月曜日 午前１０時５２分